Configure the Distributed Logical Router (DLR) to use dynamic routing.

Procedure

  1. Log in to vCenter Server by using the vSphere Web Client.
    1. Open a Web browser and go to https://nyc01r01vc01.rainpole.local/vsphere-client.
    2. Log in using the following credentials.

      Setting

      Value

      User name

      administrator@vsphere.local

      Password

      vsphere_admin_password

  2. Under Inventories, click Networking & Security.
  3. In the Navigator, click NSX Edges.
  4. Select 172.18.11.65 from the NSX Manager drop-down menu.
  5. Enable HA logging.
    1. Double-click the device labeled nyc01r01dlr01.
    2. Click the Manage tab and click the Settings tab
    3. Click Change in the HA Configuration window.
    4. Select the Enable Logging check box and click OK.
  6. Configure the routing for the Distributed Logical Router.
    1. Double-click nyc01r01dlr01.
    2. Click the Manage tab and click Routing.
    3. On the Global Configuration page, perform the following configuration steps. 
    4. Click Edit under Routing Configuration, select the Enable ECMP check box, and click OK
    5. Click Edit under Dynamic Routing Configuration, select Transit as the Router ID, and click OK.
    6. Click Publish Changes.
  7. On the left, select BGP to configure it.
    1. On the BGP page, click the Edit button.
    2. In the Edit BGP Configuration dialog box, enter the following settings and click OK.

      Setting

      Value

      Enable BGP

      Selected

      Enable Graceful Restart

      Deselected

      Local AS

      65300

    3. Click the Add icon to add a Neighbor.
    4. In the New Neighbor dialog box, enter the following values for both NSX Edge devices and click OK.

      You repeat this step two times to configure the DLR for both NSX Edge devices: nyc01r01esg01 and nyc01r01esg02.

      Setting

      nyc01r01esg01 Value

      nyc01r01esg02 Value

      IP Address

      172.18.18.1

      172.18.18.2

      Forwarding Address

      172.18.18.3

      172.18.18.3

      Protocol Address

      172.18.18.4

      172.18.18.4

      Remote AS

      65300

      65300

      Weight

      60

      60

      Keep Alive Time

      1

      1

      Hold Down Time

      3

      3

      Password

      BGP_password

      BGP_password

    5. Click Publish Changes.
  8. On the left, select Route Redistribution to configure it.
    1. Click Edit.
    2. In the Change redistribution settings dialog box, enter the following settings and click OK.

      Setting

      Value

      OSPF

      Deselected

      BGP

      Selected

    3. On the Route Redistribution page, select the default OSPF entry on the Route Redistribution table and click Edit button.
    4. Select BGP from the Learner Protocol drop-down menu, and click OK.
    5. Click Publish Changes.