Create the segments to connect nodes that send VLAN and overlay traffic.

You perform this procedure for each segment.

Table 1. NSX-T Logical Networks in a Workload Domain

Segment Name

Uplink & Type

Transport Zone

VLAN

sfo01-w-nvds01-management

Isolated - No Logical Connection

sfo01-esxi-vlan

1641

sfo01-w-nvds01-vmotion

Isolated - No Logical Connection

sfo01-esxi-vlan

1642

sfo01-w-nvds01-nfs

Isolated - No Logical Connection

sfo01-esxi-vlan

1643

sfo01-w-nvds01-uplink01

Isolated - No Logical Connection

sfo01-esxi-vlan

0-4094

sfo01-w-nvds01-uplink02

Isolated - No Logical Connection

sfo01-esxi-vlan

0-4094

sfo01-w-uplink01

Isolated - No Logical Connection

sfo01-w-uplink01

1647

sfo01-w-uplink02

Isolated - No Logical Connection

sfo01-w-uplink02

1648

sfo01-w-overlay

Isolated - No Logical Connection

sfo01-esxi-vlan

0-4094

sfo01-w-ubuntu-01

Isolated - No Logical Connection

sfo01-w-overlay

-

Procedure

  1. Log in to the user interface of NSX-T Manager.
    1. Open a Web browser and go to https://sfo01wnsx01.sfo01.rainpole.local.
    2. Log in by using the following credentials.
      Setting Value
      User name  admin
      Password  compnsx_admin_password
  2. On the main navigation bar, click Networking.
  3. In the navigation pane, select Segments.
  4. On the Segments tab, click Add Segment.
  5. Enter the following values for the sfo01-w-nvds01-management segment and click Save.

    Setting

    Value

    Name

    sfo01-w-nvds01-management

    Uplink & Type

    Isolated - No Logical Connection

    Transport Zone

    sfo01-esxi-vlan

    VLAN

    1641
  6. Repeat this procedure to create the remaining segments.
  7. On the main navigation bar, click Advanced Networking and Security.
  8. Under Networking, click Switching.
  9. Change the teaming policy for sfo01-w-nvds01-uplink01 and sfo01-w-nvds01-uplink02.
    1. Select sfo01-w-nvds01-uplink01 and click Edit.
    2. In the Edit dialog box, select Uplink01 from the Uplink Teaming Policy Name drop-down menu and click Save.
    3. Select sfo01-w-nvds01-uplink02 and click Edit.
    4. In the Edit dialog box, select Uplink02 from the Uplink Teaming Policy Name drop-down menu and click Save.