Аfter you upgrade the ESXi hosts and VMware Tools in the management cluster in Region A, upgrade the vSAN on-disk format version on these hosts.

Table 1. Management ESXi Hosts and vSAN Cluster In Region A

Cluster Name

Virtual SAN Datastore

Fully Qualified Domain Name

IP Address

sfo01-m01-mgmt01

sfo01-m01-vsan01

sfo01m01esx01.sfo01.rainpole.local

172.16.11.101

sfo01m01esx02.sfo01.rainpole.local

172.16.11.102

sfo01m01esx03.sfo01.rainpole.local

172.16.11.103

sfo01m01esx04.sfo01.rainpole.local

172.16.11.104

sfo01m01esxxx.sfo01.rainpole.local

172.16.11.1xx

Procedure

  1. Log in to vCenter Server by using the vSphere Web Client.
    1. Open a Web browser and go to https://sfo01m01vc01.sfo01.rainpole.local/vsphere-client/.
    2. Log in by using the following credentials.
      Setting Value
      User name administrator@vsphere.local
      Password vsphere_admin_password
  2. From the Home menu of the vSphere Web Client, select Hosts and Clusters.
  3. Expand the sfo01m01vc01.sfo01.rainpole.local tree, double-click the sfo01-m01fd-mgmt data center, and select the sfo01-m01fd-mgmt folder.
  4. On the Configure tab, click the vSAN tab, and click General.
  5. Under the On-Disk Format Version section, click Pre-check Update.
    Note:

    If the pre-check fails, click Details to view the reported issues.

  6. Verify that the pre-check status is Ready to Upgrade.
  7. Verify that the cluster meets all the requirements to upgrade the vSAN on-disk version.
  8. Click Upgrade and click Yes.

    vSAN on-disk format is upgraded to the version 7.0 for vSAN 6.7 Update 1. You can monitor the progress of the upgrade in the Disk format version section.