The SSD performance class and the level of vSAN performance are directly correlated. The highest-performing hardware results in the best performance of the solution. Cost is therefore the determining factor. A lower class of hardware that is more cost effective might be attractive even if the performance or size is not ideal.

 For optimal performance of vSAN, select SSD Class E or greater . See the VMware Compatibility Guide for detail on the different classes. 

SSD Performance Design Decision Background

Select a high class of SSD for optimal performance of vSAN. Before selecting a drive size, consider disk groups, sizing, and expected future growth. VMware defines classes of performance in the VMware Compatibility Guide as follows.

Table 1. SSD Performance Classes

Performance Class

Writes Per Second

Class A


Class B

5,000 – 10,000

Class C


Class D


Class E

30,000 – 100,000

Class F

100,000 +

Select an SSD size that is, at a minimum, 10% of the capacity tier drives, before failures to tolerate are considered. For example, select an SSD of at least 100 GB for a 1 TB disk group.

Caching Algorithm

Both hybrid and all-flash configurations adhere to the recommendation that 10% of consumed capacity is for the flash cache layer. Consider the following differences between the two configurations.

Hybrid vSAN

70% of the available cache is allocated for storing frequently read disk blocks, minimizing accesses to the slower magnetic disks. 30% of available cache is allocated to writes.

All-Flash vSAN

All-flash clusters have two types of flash: fast and durable write cache, and cost-effective capacity flash. In this configuration, cache is 100% allocated for writes, as read performance from capacity flash is sufficient.

Use Class E SSDs or greater for the highest possible level of performance from the vSAN volume.

Table 2. SSD Performance Class Selection

Design Quality

Option 1 Class E

Option 2 Class C





Neither design option impacts availability.




Neither design option impacts manageability.


The higher storage class is used, the better the performance.




Neither design option impacts recoverability.




Neither design option impacts security.

Legend: ↑ = positive impact on quality; ↓ = negative impact on quality; o = no impact on quality.

Table 3. Design Decisions on SSD Performance Class

Decision ID

Design Decision

Design Justification

Design Implication


Use Class E SSDs (30,000-100,000 writes per second) for the management cluster.

Because of the storage I/O performance requirements in the management cluster, you need at least Class E SSDs.

Class E SSDs can be more expensive than lower class drives.