Create the segments to connect nodes that send VLAN and overlay traffic in the NSX-T workload domain in VMware Cloud Foundation.

You create each segment and assign each uplink segments an uplink port.
Table 1. NSX-T Logical Networks in the NSX-T Workload Domain
Segment Name Uplink & Type Transport Zone VLAN
sfo01-w-nvds01-uplink01 None sfo-esxi-vlan 0-4094
sfo01-w-nvds01-uplink02 None sfo-esxi-vlan 0-4094
sfo01-w-uplink01 None sfo-w-uplink01 1647
sfo01-w-uplink02 None sfo-w-uplink02 1648
sfo02-w-nvds01-management None sfo-esxi-vlan 1661
sfo02-w-nvds01-vmotion None sfo-esxi-vlan 1662
sfo02-w-nvds01-vsan None sfo-esxi-vlan 1663
sfo02-w-nvds01-uplink01 None sfo-esxi-vlan 0-4094
sfo02-w-nvds01-uplink02 None sfo-esxi-vlan 0-4094
sfo02-w-uplink01 None sfo-w-uplink01 1667
sfo02-w-uplink02 None sfo-w-uplink02 1668
sfo-w-overlay None sfo-esxi-vlan 0-4094


  1. In a Web browser, log in to the user interface of NSX-T Manager.
    Setting Value
    URL https://sfo01wnsx01.sfo01.rainpole.local
    User name admin
    Password nsx_admin_password
  2. On the main navigation bar, click Networking.
  3. In the navigation pane, select Segments.
  4. On the Segments tab, click Add Segment.
  5. Configure the values for the sfo02-w-nvds01-management segment and click Save.
    Setting Value
    Name sfo02-w-nvds01-management
    Uplink & Type None
    Transport Zone sfo01-esxi-vlan
    VLAN 1661
  6. Repeat this step to create the remaining segments.
  7. Change the teaming policy for the uplink segments.
    1. On the main navigation bar, click Advanced Networking and Security.
    2. Under Networking, click Switching.
    3. Select the uplink segment, click Edit and configure the following uplink teaming policy.
      Uplink Segment Uplink teaming policy name
      sfo01-w-nvds01-uplink01 Uplink01
      sfo01-w-nvds01-uplink02 Uplink02
      sfo02-w-nvds01-uplink01 Uplink01
      sfo02-w-nvds01-uplink02 Uplink02