You can customize the Workspace ONE Intelligent Hub settings in the UEM console. For example, specify an SDK Profile to use with the Workspace ONE Intelligent Hub to harness Workspace ONE UEM functionality.

Procedure

  1. Navigate to Devices > Device Settings > Apple > Apple iOS > Hub Settings.
  2. Configure the following settings for the Workspace ONE Intelligent Hub:
    Table 1. General
    Setting Description
    Disable Un-Enroll in Hub This setting disables the user's ability to unenroll from Workspace ONE UEM MDM using the Workspace ONE Intelligent Hub. This setting is only available in the Workspace ONE Intelligent Hub v4.9.2 and higher.
    Background App Refresh

    This setting tells the Workspace ONE Intelligent Hub the maximum allowed time interval to refresh app content. Some applications run for a brief period before reaching a suspended state. Background App Refresh is a feature in iOS where the application itself wakes from this suspended state. During this refresh, the Workspace ONE Intelligent Hub reports information, such as compromised detection, hardware details, GPS, iBeacon, and telecom, to the UEM console. The frequency at which the Workspace ONE Intelligent Hub refreshes is controlled by the OS and only completed during efficient times, such as when the device is plugged into a power source, frequency of use, or connected to Wi-Fi.

    To take advantage of the Background App Refresh feature, this setting must be enabled in the UEM console, the Workspace ONE Intelligent Hub cannot be killed on the device, and Background App Refresh must be enabled on the device for the Workspace ONE Intelligent Hub under Settings > General > Background App Refresh.
    Minimum Refresh Interval Select the minimum amount of time that must pass before the device attempts to refresh app content.
    Transmit on Wi-Fi only Enable background refresh to occur over Wi-Fi connections only.
  3. Customize the following extra configurations for the Workspace ONE Intelligent Hub from the Settings and Policies page in the UEM console for Single Sign On in this guide.

What to do next

For information about offline access, branding, and other Settings and Polices, refer to the VMWare AirWatch Mobile Application Management Guide .