The AirWatch Agent for Windows Phone devices is pre-configured with AirWatch. Change these settings when you need the AirWatch Agent to meet certain business needs.

  1. In the AirWatch Console, select the applicable Organization Group to apply settings to.
  2. Navigate to Groups & Settings > All Settings > Device & Users > Windows > Windows Phone > Agent Settings .
  3. Enable the following options in the Agent Settings section:

    Setting Description
    Heartbeat Interval (min) Set the time (in minutes) the AirWatch Agent waits before checking in with the UEM console.
    Data Sample Interval (min) Set the time (in minutes) the AirWatch Agent waits to collect data from the device.
    Profile Refresh Interval (min) Set the frequency (in minutes) the profile list of each device refreshes on the server.
    Enable Passcode Enable the use of a passcode to access the AirWatch Agent settings on the device.
    Administrative Passcode

    Enter the administrative passcode to enter for access to agent settings on the device.

    Collect Location Data Enable to collect the location data from the device. The location is determined based on the Wi-Fi network of the device. When located data is available, the AirWatch Agent sends the location data to the console at the Transmit Interval.
    GPS Sample Interval (min) Set the time (in minutes) the AirWatch Agent waits before collecting GPS data from the device.
    Enable Push Notification Services Enable to allow the console to send Push Notifications to devices.