Configure Android devices Access Point Name (APN) settings to unify device fleet carrier settings and correct misconfigurations.

  1. Navigate to Devices > Profiles & Resources > Profiles > Add > Add Profile > Android .

  2. Select Device to deploy your profile to a device.

  3. Configure the profile's General settings. The APN profile only displays when the OEM Settings field is toggled to Enabled and Samsung is selected from the Select OEM field.

    These settings determine how the profile deploys and who receives it. For more information on General settings, see Add General Profile Settings.

  4. Select the APN payload.
  5. Configure the APN settings, including:

    Setting Description
    Display Name Provide a user friendly name of the access name.
    Access Point Name (APN) Enter the APN provided by your carrier (For example: come.moto.cellular).
    Mobile Country Code (MCC)

    Enter the 3-digit country code. This values checks whether devices are roaming on a different carrier than entered here.

    This is used in combination with a mobile network code (MNC) to uniquely identify a mobile network operator (carrier) using the GSM (including GSM-R), UMTS, and LTE mobile networks.

    Mobile Network Code (MNC) Enter the 3-digit network code. This values checks whether devices are roaming on a different carrier than entered here. This is used in combination with a mobile country code (MCC) to uniquely identify a mobile network operator (carrier) using the GSM (including GSM-R), UMTS, and LTE mobile networks.
    MMS Server (MMSC) Specify the server address.
    MMS Proxy Server Enter the MMS port number
    MMS Proxy Server Port Enter the target port for the proxy server.
    Server Enter the name or address used for the connection.
    Proxy Server Enter the proxy server details.
    Proxy Server Port Enter the proxy server port for all traffic. Select Add to continue this process.
    Access Point User Name Specify the username that connects to the access point.
    Access Point Password Specify the password that authenticates t he access point.
    Authentication Type Select the authentication protocol.
    Set as Preferred APN Enable to ensure all end user devices have the same APN settings and to prevent any changes being made from the device or carrier.
  1. Select Save & Publish.