Use the Device List View in Workspace ONE UEM to see a full listing of devices in the currently selected organization group. You can also filter the view to show only the types of devices you want to see.

Device List View,UEM,Workspace ONE,device list,friendly name,device status

The Last Seen column displays an indicator showing the number of minutes elapsed since the device has checked-in. The indicator is red or green, depending on how long the device is inactive. The default value is 480 minutes (8 hours) but you can customize this by navigating to Groups & Settings > All Settings > Devices & Users > General > Advanced and change the Device Inactivity Timeout (min) value.

Select a device-friendly name in the General Info column at any time to open the details page for that device. A Friendly Name is the label you assign to a device to help you differentiate devices of the same make and model.

Sort by columns and configure information filters to review activity based on specific information. For example, sort by the Compliance Status column to view only devices that are currently out-of-compliance and target only those devices. Search all devices for a friendly name or user name to isolate one device or user.

Hover-Over Pop-Up Window in Device List View

Each device in the General Info column features a tool tip icon in the shape of a folder located in the upper-right corner next to the device friendly name. When this icon is tapped (mobile touch device) or hovered-over with a mouse pointer (PC or Mac), it displays a Hover-Over pop-up window. This pop-up window contains information such as Friendly Name, Organization Group, Group ID, Management, and Ownership.

Similar tool tip icons are found in the Enrollment and Compliance Status columns in the Device List view. These tool tip icons feature Hover-Over Pop-Up windows displaying Enrollment Date and Compliance Violations respectively.

Customize Device List View Layout

Display the full listing of visible columns in the Device List view by selecting the Layout button and select the Custom option. This view enables you to display or hide Device List columns per your preferences.

There is also an option to apply your customized column view to all administrators at or below the current organization group (OG). For instance, you can hide 'Asset Number' from the Device List views of the current OG and of all the OGs underneath.

Once all your customizations are complete, select the Accept button to save your column preferences and apply this new column view. You can return to the Layout button settings at any time to tweak your column display preferences.

Some notable device list view custom layout columns include the following.
  • Android Management
  • SSID (Service Set Identifier or Wi-Fi network name)
  • Wi-Fi MAC Address
  • Wi-Fi IP Address
  • Public IP Address

Exporting List View

You can save an XLSX or CSV (comma-separated values) file of the entire Device List View that can be viewed and analyzed with MS Excel. If you have a filter applied to the Device List View, the exported listing reflects the filtered results.

Select the Export button, select the format (XLSX or CSV), then navigate to Monitor > Reports & Analytics > Exports to view and download the resulting report.

Search in Device List View

You can search for a single device for quick access to its information and take remote action on the device.

To run a search, navigate to Devices > List View, select the Search List bar and enter a user name, device-friendly name, or other device-identifying element. This action initiates a search across all devices, using your search parameter, within the current organization group and all child groups.

Device List View Action Button Cluster

With one or more devices selected in the Device List View, you can perform common actions with the action button cluster including Query, Send [Message], Lock, and other actions accessed through the More Actions button.

Available Device Actions vary by platform, device manufacturer, model, enrollment status, and the specific configuration of your Workspace ONE UEM console.

Remote Assist

You can start a Remote Assist session on a single qualifying device allowing you to remotely view the screen and control the device. This feature is ideal for troubleshooting and performing advanced configurations on devices in your fleet.

To use this feature, you must satisfy the following requirements.

  • You must own a valid license for Workspace ONE Assist.
  • You must be an administrator with a role assigned that includes the appropriate Assist permissions.
  • The Assist app must be installed on the device.
  • Supported device platforms:
    • Android
    • iOS
    • macOS
    • Windows 10
    • Windows Mobile

Select the check box to the left of a qualifying device in the Device List View and the Remote Assist button displays. Select this button to initiate a Remote Assist session.

For more information, see the Workspace ONE Assist Guide.

Unenrolled Devices

Unenrolled devices may or may not be viewed in the Workspace ONE UEM console depending upon whether they were registered or held an enrolled status in the past. You can also get access to troubleshooting logs made before a device's unenrollment from the UEM console.

Unenrolled Status

An unenrolled device is a device in one of three possible scenarios.

  1. The device is new to Workspace ONE UEM and is not registered, not enrolled, and therefore not managed. A device in this scenario cannot be seen in the UEM console.
  2. The new device has begun the Workspace ONE enrollment process and is registered with the UEM console but not yet fully enrolled. This scenario normally occurs during a wave of new enrollments where devices are registered as a way of restricting enrollment. The mechanism that allows registered devices to enroll is a device allowlist. A device in this state can be seen by the UEM console with the status 'unenrolled'. Given that a registered device is traditionally a part of the enrollment process, a device does not remain in this scenario for long.
  3. A device can also become unenrolled if the device end user manually removes the MDM profile from the device.

For more information, see the section on this page entitled Deleting Devices.

Access Troubleshooting Logs Made Before Unenrollment

You can access Troubleshooting/Commands logs made before the device was unenrolled. These logs can be useful to get a full picture of the device's history.

  1. Navigate to Devices > List View.
  2. Select a device you know to have been unenrolled in the past. You have the option to Filter the list view to show only devices with a Status of Unenrolled.

    Result: When you select a device, the Details View displays.

  3. Select the More tab drop-down, then select Troubleshooting, followed by the Commands tab.

What to do next: If you do not intend to re-enroll a previously unenrolled device to the same customer organization group again, consider deleting the device record permanently so the device history is clear upon re-enrollment. Contact Workspace ONE Support to make this arrangement.

Bulk Actions in Device List View

Once you filter a subset of devices, you can perform bulk actions to multiple devices by selecting devices and then selecting from the action button cluster.

The screenshot shows the bulk actions button cluster which you see when you select one or more devices.

Bulk actions are only available in the Device List View if they are enabled in the system settings (Groups & Settings > All Settings > System > Security > Restricted Actions). Password Protect Actions require a PIN to perform.

With devices selected in the List View, the number of devices selected is displayed next to the action buttons. This number includes filtered devices that are selected as well.

Note: In the Device List View, the bulk actions available when you select a block of devices with the shift key may be different than the bulk actions available when you use the Global check box.

Selecting Devices in Device List View

You can select individual devices on a page by ticking individual check boxes to the left of each device. You can also select a block of devices across multiple pages. You can even select all devices in your entire fleet, which might trigger the restricted actions warning.

Selecting a Block of Devices

You can select a contiguous block of devices, even across multiple pages, by selecting the device check box at the beginning of the block. Next, hold down the shift key, then select the device check box at the end of the block. This action is similar to the block-selection in the Windows and Mac environments and it allows you to apply bulk actions to those selected devices.

Selecting All Devices

The Global check box, located to the left of the Last Seen column header, can be used to select or deselect all devices in the listing. If your List View contains a filtered listing of devices, the Global check box can be used to select or deselect all filtered devices.

When the Global check box features a green minus sign (The green minus sign icon in the global check box indicates at least one but not all devices are selected.), it means at least one but not all devices are selected. Select this icon again and it changes to a check mark sign (The green minus sign icon in the global check box indicates all devices are selected.), indicating that all devices in the listing (either filtered or unfiltered) have been selected. Select it a third time and it changes again to an empty check box (The green minus sign icon in the global check box indicates zero devices are selected.), indicating that no devices in the listing are currently selected.

Note: In the Device List View, the bulk actions available when you select a block of devices with the shift key may be different than the bulk actions available when you use the Global check box.

Deleting Devices

You can delete an enrolled device from the Workspace ONE UEM console.

Deleting a device has the following three impacts.
  1. It removes the device from the Device List View.
  2. An *Enterprise Wipe is executed, removing any sensitive corporate content from the device.
  3. The device is thereby excluded from all device management functions and features.
However, a deleted device is still registered with the UEM console and gets added to the allowlist. This addition means the deleted device can be re-enrolled easily. A device can remain in this scenario indefinitely. You can retain up to approximately 150,000 devices on this allowlist. Contact support if your needs exceed this amount.

You can remove the registration record of any allowlisted device at any time, which makes the device unseen and unknown by the UEM console. A device in this scenario can be enrolled at a future date.

Alternately, you can remove the device from the allowlist and add the device to a denylist, preventing future enrollment and effectively banning the device from your fleet.

You can delete a device from the Device List View or the Device Details View.
  1. Navigate to Devices > List View and select the device you want to delete by clicking the check box to the left of the device listing.
    1. Some devices cannot be deleted from the list view. If you want to delete such a device, navigate to Devices > List View and instead, select the device Friendly Name in the General Info column. This action displays the Details View. The Friendly Name is the label you assign to a device to help you differentiate devices of the same make and model.
  2. Locate the More Actions button and select it.
  3. Select Delete Device and select OK at the confirmation prompt.

Results: the Device List View entry for the deleted device includes the "Deleting" indicator.

* When you select multiple devices to be deleted, you may trigger the Wipe Protection feature. Any devices wiped after the wipe protection is unlocked must be manually deleted.

For example, if you select 25 devices to be deleted and Wipe Protection is activated after 10 deletions, the remaining 15 devices are enterprise wiped after you unlock wipe protection but they are not deleted from UEM as the first 10 were. You must delete these 15 remaining devices manually.