The Management Pack for HPE 3PAR StoreServ creates alerts and provides recommended actions based on various symptoms (health status notifications and events) that it detects in your HPE 3PAR StoreServ environment. See the table below for the list of alerts available in the Management Pack.

Name Description Symptom Recommendation
Controller Node Offline Controller Node is offline Controller Node Offline Consider restarting the controller node and running a health check of the system.
Array Capacity is Stressed Array Capacity is Low Low Array Storage Capacity: Warning Low Array Storage Capacity: Critical Consider increasing the number of disk drives available to this array.
FC Capacity is Stressed FC Capacity is Low Low FC Storage Capacity: Warning Low FC Storage Capacity: Critical Consider increasing the number of FC disks available to this array.
NL Capacity is Stressed NL Capacity is Low Low NL Storage Capacity: Warning Low NL Storage Capacity: Critical Consider increasing the number of NL disks available to this array.
SSD Capacity is Stressed SSD Capacity is Low Low SSD Storage Capacity: Warning Low SSD Storage Capacity: Critical Consider increasing the number of SSDs available to this array.
CPG Total Used Storage Ratio Above Threshold Total Used Storage Ratio is above threshold level. CPG Total Used Storage Above Threshold: Warning CPG Total Used Storage Above Threshold: Critical Consider increasing the number of disks available to the CPG, or decreasing storage on the current disks related to this CPG.
CPG Status Is Abnormal CPG is in a bad state. CPG Status Degraded CPG Status Failed CPG Status Unknown Consider increasing the number of disks available to the CPG, or decreasing storage on the current disks related to this CPG.
Virtual Volume Status Is Abnormal Virtual volume is in a bad state. Virtual Volume Status Unknown Virtual Volume Status Degraded Virtual Volume Status Failed Consider checking that the virtual volume still exists and is not at capacity.
Virtual Volume Total Used Storage Ratio Above Threshold Total Used Storage Ratio is above threshold level. Virtual Volume Total Used Storage Above Threshold: Warning Virtual Volume Total Used Storage Above Threshold: Critical Consider creating additional virtual volumes.
Port Mode Suspended The Mode of this port has changed to Suspended. Port mode has changed to Suspended Check that the port is configured correctly.
Port Link State is Offline The Link State of this port has changed to Offline. Port Link State is Offline Check that the port is configured correctly.
Port has Failed Over to Partner This port has failed over to its partner port. Port has failed over to partner port Check for failed network connectivity (e.g., cabling, switches) between this port and the HBA. Check that the port is configured correctly.
Active Failover Port has Failed Both this port and its partner port have failed. The connected host will not be able to reach the Array. Both this port and partner port have failed The partner port has failed Port is in a Loss Sync state Check for failed network connectivity (e.g., cabling, switches) between this port and its partner port and the corresponding HBAs. Check that the ports are configured correctly.
Port is in a 'Loss Sync' State. Port is in a 'Loss Sync' state. This port cannot reach its intended target. Port is in a Loss Sync state Check for failed network connectivity (e.g., cabling, switches) between this port and the HBA. Check that the port is configured correctly.
Port is in an Error State Port is in an unspecified error state. Port Link is in an Error state Check that the ports are configured correctly. Check for failures in the Controller Node. Contact your authorized service provider for assistance.
Port Firmware is Dead Port firmware is dead. Port firmware is dead Contact your authorized service provider for assistance.
Port has an Unknown State The system is unable to determine the link state of the port. Port in Unknown State Contact your authorized service provider for assistance.
Low Disk Space Remaining storage on the disk is running low. Low Disk Storage Capacity: Warning Low Disk Storage Capacity: Critical Consider adding additional storage disks, or reducing the amount of storage allocated to the fully provisioned virtual volumes on this array.
Disk Storage is Failing The disk contains a high level of failed chunklets. Disk Contains Failed Chunklets: Warning Disk Contains Failed Chunklets: Critical Consider replacing this disk.
Virtual Volume Latency is Abnormal Latency on the volume has been detected as significantly higher than usual. Virtual Volume Read Latency is Abnormally High: Warning Virtual Volume Write Latency is Abnormally High: Warning Virtual Volume Average Latency is Abnormally High: Warning Consider reducing the load on this system.
Port Latency is Abnormal Latency on the port has been detected as significantly higher than usual. Port Read Latency is Abnormally High: Warning Port Write Latency is Abnormally High: Warning Port Average Latency is Abnormally High: Warning Consider reducing the load on this system.
Disk Latency is Abnormal Latency on the disk has been detected as significantly higher than usual. Disk Read Latency is Abnormally High: Warning Disk Write Latency is Abnormally High: Warning Disk Average Latency is Abnormally High: Warning Consider reducing the load on this system. If the problem persists, consider replacing this disk.