A list of all vApp properties that you can modify by changing their values.

Bitfusion Server Setup

Property Value
guestinfo.bitfusion.host.hostname The hostname for the server.

Valid characters for hostnames are the ASCII characters A through Z (both upper- and lower-case), the digits 0 to 9, and the hyphen (-). A hostname cannot start with a hyphen.

guestinfo.bitfusion.server.vcenter-guid The vCenter Server GUID.
guestinfo.bitfusion.server.vcenter-url The vCenter Server URL.
guestinfo.bitfusion.server.vcenter-username The username for the vCenter Server instance.
guestinfo.bitfusion.server.vcenter-password The password for the vCenter Server instance.
guestinfo.bitfusion.host.install_nvidia_packages Slide the toggle button to ON position to download and install the NVIDIA software, or slide the toggle button to OFF position to skip this process.

Network Adapter 1 (Management and Data)

Property Value
guestinfo.bitfusion.host.net1.ipv4address The IPv4 address of the network adapter. If you are using DHCP, leave this value blank.
Note: IPv6 is not supported.
guestinfo.bitfusion.host.net1.netmask The network Classless Inter-Domain Routing (CIDR) settings.
guestinfo.bitfusion.host.net1.mtu The MTU size. The default value is 1500. For optimal performance, specify an MTU size of 4000 or greater. You can leave this text box blank for default value.
Note: If you set an MTU size greater than 1500, verify that the network switches in your data center are enabled for jumbo frames.
guestinfo.bitfusion.host.net1.gateway The network gateway address to use with the appliance. If you are using DHCP, leave this text box blank.
guestinfo.bitfusion.host.net1.dns The DNS server address to use with the appliance. If you are using DHCP, leave this text box blank.
guestinfo.bitfusion.host.net1.domain The DNS search domain address to use with the appliance. If you are using DHCP, leave this text box blank.
guestinfo.bitfusion.host.net1.ntp The NTP server address to use with the appliance. If you are using DHCP and the DHCP server supports sending NTP server information, leave this text box blank.

Network Adapter 2 (Data)

Property Value
guestinfo.bitfusion.host.net2.configure Activate or deactivate the toggle switch to configure or not to configure this interface.
guestinfo.bitfusion.host.net2.ipv4address The IPv4 address of the network adapter. If you are using DHCP, leave this value blank.
Note: IPv6 is not supported.
guestinfo.bitfusion.host.net2.netmask The network Classless Inter-Domain Routing (CIDR) settings.
guestinfo.bitfusion.host.net2.mtu The MTU size. The default value is 1500. For optimal performance, specify an MTU size of 4000 or greater. You can leave this text box blank for default value.
Note: If you set an MTU size greater than 1500, verify that the network switches in your data center are enabled for jumbo frames.

Network Adapter 3 (Data)

Property Value
guestinfo.bitfusion.host.net3.configure Activate or deactivate the toggle switch to configure or not to configure this interface.
guestinfo.bitfusion.host.net3.ipv4address The IPv4 address of the network adapter. If you are using DHCP, leave this value blank.
Note: IPv6 is not supported.
guestinfo.bitfusion.host.net3.netmask The network Classless Inter-Domain Routing (CIDR) settings.
guestinfo.bitfusion.host.net3.mtu The MTU size. The default value is 1500. For optimal performance, specify an MTU size of 4000 or greater. You can leave this text box blank for default value.
Note: If you set an MTU size greater than 1500, verify that the network switches in your data center are enabled for jumbo frames.

Network Adapter 4 (Data)

Property Value
guestinfo.bitfusion.host.net4.configure Activate or deactivate the toggle switch to configure or not to configure this interface.
guestinfo.bitfusion.host.net4.ipv4address The IPv4 address of the network adapter. If you are using DHCP, leave this value blank.
Note: IPv6 is not supported.
guestinfo.bitfusion.host.net4.netmask The network Classless Inter-Domain Routing (CIDR) settings.
guestinfo.bitfusion.host.net4.mtu The MTU size. The default value is 1500. For optimal performance, specify an MTU size of 4000 or greater. You can leave this text box blank for default value.
Note: If you set an MTU size greater than 1500, verify that the network switches in your data center are enabled for jumbo frames.