Create a RAID logical volume that uses all physical disks on a server.

About this task

Note:

Refer to the Release Notes for supported disk and RAID combinations.

Procedure

  1. Start or restart the HP server.
  2. At boot time, press F8 to enter the Integrated Lights-Out 2 setup.
  3. Provide credentials at the login prompt.
  4. Press Ctrl+S to open the Intel Boot Agent Setup Menu.
  5. Press F8 to open the ROM Array Configuration menu.

    The Main Menu appears.

  6. From the Main Menu, select Create Logical Drive and press Enter.
  7. Select all physical disks under Available Physical Drives.
  8. Select an appropriate RAID level under RAID Configurations.
  9. Press Esc.

Results

The HP RAID controller creates the RAID logical drive.