After you have finished upgrading the Virtual SAN hosts, you can use the Ruby vSphere Console (RVC) to continue with the disk format upgrade.
Verify that you are using the updated version of vCenter Server.
Verify that the version of the ESXi hosts running in the Virtual SAN cluster is 6.0 or later.
Verify that the disks are in a healthy state from the Disk Management page in the vSphere Web Client. You can also run the vsan.disk_stats RVC command to verify disk status.
Verify that the hardware and software that you plan on using are certified and listed in the VMware Compatibility Guide Web site at http://www.vmware.com/resources/compatibility/search.php.
Verify that you have enough free space to perform the disk format upgrade. Run the RVC vsan.whatif_host_failures command to determine that you have enough capacity to successfully finish the upgrade or perform a component rebuild in case you encounter failure during the upgrade.
Verify that you have PuTTY or similar SSH client installed for accessing RVC.
For detailed information about downloading the RVC tool and using the RVC commands, see the RVC Command Reference Guide.
Verify that your hosts are not in maintenance mode. When upgrading the on-disk format, do not place your hosts in maintenance mode. When any member host of a Virtual SAN cluster enters maintenance mode, the available resource capacity in the cluster is reduced because the member host no longer contributes capacity to the cluster and the cluster upgrade might fail.
Verify that there are no component rebuilding tasks currently in progress in the Virtual SAN cluster by running the RVC vsan.resync_dashboard command.
- Log in to your vCenter Server using RVC.
- Run the vsan.disks_stats /< vCenter IP address or hostname>/<data center name>/computers/<cluster name> command to view the disk status.
For example: vsan.disks_stats /192.168.0.1/BetaDC/computers/VSANCluster
The command lists the names of all devices and hosts in the Virtual SAN cluster. The command also displays the current disk format and its health status. You can also check the current health of the devices in the Health Status column from the Disk Management page. For example, the device status appears as Unhealthy in the Health Status column for the hosts or disk groups that have failed devices.
- Run the vsan.ondisk_upgrade <path to vsan cluster> command .
For example: vsan.ondisk_upgrade /192.168.0.1/BetaDC/computers/VSANCluster
- Monitor the progress in RVC.
RVC upgrades one disk group at a time.
After the disk format upgrade has completed successfully, the following message appears.
Done with disk format upgrade phase
There are n v1 objects that require upgrade Object upgrade progress: n upgraded, 0 left
Object upgrade completed: n upgraded
Done VSAN upgrade
- Run the vsan.obj_status_report command to verify that the object versions are upgraded to the new on-disk format.