Create a VMkernel adapter on hosts associated with a distributed switch to provide network connectivity to the hosts and to handle the traffic for vSphere vMotion, IP storage, Fault Tolerance logging, and vSAN. You can create VMkernel adapters on multiple hosts simultaneously by using the Add and Manage Hosts wizard.
You should dedicate one distributed port group for each VMkernel adapter. One VMkernel adapter should handle only one traffic type.
- In the vSphere Web Client, navigate to the distributed switch.
- From the Actions menu, select Add and Manage Hosts.
- In Select task, select Manage host networking and click Next.
- In Select hosts, click Attached hosts and select from the hosts that are associated with the distributed switch.
- Click Next.
- In Select network adapter tasks, select Manage VMkernel adapters and click Next.
- Click New adapter.
The Add Networking wizard opens.
- In Select target device, select a distributed port group, and click Next.
- On the Port properties page, configure the settings for the VMkernel adapter.
The network label is inherited from the label of the distributed port group.
Select IPv4, IPv6, or both.Note:
The IPv6 option does not appear on hosts that do not have IPv6 enabled.
Select a TCP/IP stack from the list. Once you set a TCP/IP stack for the VMkernel adapter, you cannot change it later. If you select the vMotion or the Provisioning TCP/IP stack, you will be able to use only these stacks to handle vMotion or Provisioning traffic on the host. All VMkernel adapters for vMotion on the default TCP/IP stack are disabled for future vMotion sessions. If you set the Provisioning TCP/IP stack, VMkernel adapters on the default TCP/IP stack are disabled for operations that include Provisioning traffic, such as virtual machine cold migration, cloning, and snapshot migration.
You can enable services for the default TCP/IP stack on the host. Select from the available services:
vMotion traffic. Enables the VMkernel adapter to advertise itself to another host as the network connection where vMotion traffic is sent. The migration with vMotion to the selected host is not possible if the vMotion service is not enabled for any VMkernel adapter on the default TCP/IP stack, or there are no adapters using the vMotion TCP/IP stack.
Provisioning traffic. Handles the data transferred for virtual machine cold migration, cloning, and snapshot migration.
Fault Tolerance traffic. Enables Fault Tolerance logging on the host. You can use only one VMkernel adapter for FT traffic per host.
Management traffic. Enables the management traffic for the host and vCenter Server. Typically, hosts have such a VMkernel adapter created when the ESXi software is installed. You can create another VMkernel adapter for management traffic on the host to provide redundancy.
vSphere Replication traffic. Handles the outgoing replication data that is sent from the source ESXi host to the vSphere Replication server.
vSphere Replication NFC traffic. Handles the incoming replication data on the target replication site.
vSAN. Enables thevSAN traffic on the host. Every host that is part of a vSAN cluster must have such a VMkernel adapter.
- If you selected the vMotion TCP/IP or the Provisioning stack, click OK in the warning dialog that appears.
If a live migration is already initiated, it completes successfully even after the involved VMkernel adapters on the default TCP/IP stack are disabled for vMotion. Same refers to operations that include VMkernel adapters on the default TCP/IP stack that are set for the Provisioning traffic.
- (Optional) On the IPv4 settings page, select an option for obtaining IP addresses.
Obtain IPv4 settings automatically
Use DHCP to obtain IP settings. A DHCP server must be present on the network.
Use static IPv4 settings
Enter the IPv4 IP address and subnet mask for the VMkernel adapter.
The VMkernel Default Gateway and DNS server addresses for IPv4 are obtained from the selected TCP/IP stack.
Select the Override default gateway for this adapter check box and enter a gateway address, if you want to specify a different gateway for the VMkernel adapter.
- (Optional) On the IPv6 settings page, select an option for obtaining IPv6 addresses.
Obtain IPv6 addresses automatically through DHCP
Use DHCP to obtain IPv6 addresses. A DHCPv6 server must be present on the network.
Obtain IPv6 addresses automatically through Router Advertisement
Use router advertisement to obtain IPv6 addresses.
In ESXi 6.5 and later router advertisement is enabled by default and supports the M and O flags in accordance with RFC 4861.
Static IPv6 addresses
Click Add IPv6 address to add a new IPv6 address.
Enter the IPv6 address and subnet prefix length, and click OK.
To change the VMkernel default gateway, click Override default gateway for this adapter.
The VMkernel Default Gateway address for IPv6 is obtained from the selected TCP/IP stack.
- Review your settings selections on the Ready to complete page and click Finish.
- Follow the prompts to complete the wizard.