The Network panel displays server-wide network utilization statistics.

Statistics are arranged by port for each virtual network device configured. For physical network adapter statistics, see the row in the table that corresponds to the port to which the physical network adapter is connected. For statistics on a virtual network adapter configured in a particular virtual machine, see the row corresponding to the port to which the virtual network adapter is connected.

Table 1. Network Panel Statistics
Column Description
PORT-ID Virtual network device port ID.
UPLINK Y means that the corresponding port is an uplink. N means it is not.
UP Y means that the corresponding link is up. N means it is not.
SPEED Link speed in Megabits per second.
FDUPLX Y means the corresponding link is operating at full duplex. N means it is not.
USED-BY Virtual network device port user.
DTYP Virtual network device type. H means HUB and S means switch.
DNAME Virtual network device name.
PKTTX/s Number of packets transmitted per second.
PKTRX/s Number of packets received per second.
MbTX/s MegaBits transmitted per second.
MbRX/s MegaBits received per second.
%DRPTX Percentage of transmit packets dropped.
%DRPRX Percentage of receive packets dropped.
TEAM-PNIC Name of the physical NIC used for the team uplink.
PKTTXMUL/s Number of multicast packets transmitted per second.
PKTRXMUL/s Number of multicast packets received per second.
PKTTXBRD/s Number of broadcast packets transmitted per second.
PKTRXBRD/s Number of broadcast packets received per second.

The following table displays the interactive commands you can use with the network panel.

Table 2. Network Panel Interactive Commands
Command Description
T Sorts by Mb Tx column.
R Sorts by Mb Rx column.
t Sorts by Packets Tx column.
r Sorts by Packets Rx column.
N Sorts by PORT-ID column. This is the default sort order.
L Changes the displayed length of the DNAME column.