Before you upgrade from vRealize Automation 6.2.4 or 6.2.5, you must increase hardware resources for each VMware vRealize ™ Automation appliance.

About this task

If you have taken a snapshot of each vRealize Automation appliance, you must clone each appliance and increase the hardware resources on each clone. Ensure that you have at least 60 GB of free space on each appliance in your VMware vCenter Server ™. After you clone your appliances, power off the original appliances before you perform this procedure on each appliance clone.

These steps are based on the Windows client.

Procedure

  1. Log in to vCenter Server.
  2. Right-click a cloned vRealize Automation appliance icon and select Edit Settings.
  3. Select Memory and set the value to 18 GB.
  4. Select CPU and set the Number of virtual sockets value to 4.
  5. Extend the size of virtual Disk 1 to 50 GB.
    1. Select Disk 1.
    2. Change the size to 50 GB.
    3. Click OK.
  6. If you do not have Disk 3, complete these steps to add a Disk 3 with a disk size of 25 GB.
    1. Click Add above the Resources table to add a virtual disk.
    2. Select Hard Disk for the Device Type, and click Next.
    3. Select Create a new virtual disk, and click Next.
    4. Set disk size value to 25 GB.
    5. Select Store with the virtual machine and click Next.
    6. Verify that the Independent option is deselected for Mode and SCSI (0:2) is selected for Virtual Device Mode, and click Next.

      If prompted to accept recommended settings, accept the recommended settings.

    7. Click Finish.
    8. Click OK.
  7. If there is an existing virtual Disk 4 from a previous vRealize Automation release, complete these steps.
    1. Power on the virtual machine.
    2. Open a new command prompt and navigate to the /etc/fstab.
    3. Open the fstab file, and remove lines starting with /dev/sdd that contain the Wal_Archive write ahead logs.
    4. Save the file.
    5. Power off the virtual machine.
    6. Right-click the cloned vRealize Automation appliance icon and select Edit Settings.
    7. Delete Disk 4 on the cloned virtual machine. and perform the substeps for step 8 to create a new Disk 4 with a disk size of 50 GB.
  8. If there is an existing virtual Disk 4 from a previous vRealize Automation release, complete these steps.
    1. Power on the virtual machine.
    2. Open a new command prompt and navigate to /etc/fstab.
    3. Open the fstab file, and remove lines starting with /dev/sdd that contain the Wal_Archive write ahead logs.
    4. Save the file.
    5. Power off the virtual machine.
    6. Right-click the cloned vRealize Automation appliance icon and select Edit Settings.
    7. Delete Disk 4 on the cloned virtual machine. and complete the next step to create a new Disk 4 with a disk size of 50 GB.
  9. If you do not have a Disk 4, complete these steps to add a Disk 4 with a disk size of 50 GB.
    1. Click Add above the Resources table to add a virtual disk.
    2. Select Hard Disk for the Device Type, and click Next.
    3. Select Create a new virtual disk, and click Next.
    4. Set disk size value to 50 GB.
    5. Select Store with the virtual machine and click Next.
    6. Verify that the Independent option is deselected for Mode and SCSI (0:2) is selected for Virtual Device Mode, and click Next.

      If prompted to accept recommended settings, accept the recommended settings.

    7. Click Finish.
    8. Click OK.
  10. Create a snapshot of the virtual machine.

What to do next

Power On the Entire System.