When maintaining an environment or network, you might need to assign a different IP address to an existing vRealize Automation appliance.

Before you begin

  • As a precaution, take snapshots of vRealize Automation appliances and IaaS servers.

  • From a console session as root on the vRealize Automation appliance, inspect entries in the /etc/hosts file.

    Look for address assignments that might conflict with the new IP address plan, and make changes as needed.

    On all IaaS servers, repeat the process for the Windows\system32\drivers\etc\hosts file.

  • Shut down the vRealize Automation appliance.

  • Stop all vRealize Automation services on IaaS servers.

Procedure

  1. In vSphere, locate the vRealize Automation appliance, and select Actions > Edit Settings.
  2. Click vApp Options.
  3. Expand Networking Properties, and update the IP address.
  4. Expand IP allocation, and enable the OVF environment option.
  5. Expand OVF Settings, and enable the ISO image option.

    Figure 1. OVF Environment and ISO Image Options
    Appliance Address, Credentials, and Fingerprint

  6. Click OK.
  7. Start the vRealize Automation appliance.
  8. Log in as root to the vRealize Automation appliance management interface.

    https://vrealize-automation-appliance-FQDN:5480

  9. Click the Network tab.
  10. Below the tabs, click Address.
  11. Update the IP address.
  12. At the upper right, click Save Settings.
  13. Shut down the vRealize Automation appliance.
  14. In DNS, update entries for the new IP addresses.

    Only update existing A-type records. Do not change FQDNs.

    If using a load balancer, also update load balancer IP settings for back-end nodes, service pools, and virtual servers as needed.

  15. Start the vRealize Automation appliance.
  16. Start vRealize Automation services on IaaS servers.