L'API v1alpha3 vous permet de provisionner un cluster TanzuKubernetesCluster à l'aide de TKG sur le Superviseur. Reportez-vous à cette rubrique pour la documentation de l'API v1alpha3.

TanzuKubernetesCluster v1alpha3 API

La spécification répertorie tous les paramètres disponibles pour le provisionnement d'un TanzuKubernetesCluster à l'aide de l'API v1alpha3.
Important : Un nom de clé valide doit être composé uniquement de caractères alphanumériques, d'un tiret (tel que key-name), d'un trait de soulignement (tel que KEY_NAME) ou d'un point (tel que key.name). Vous ne pouvez pas utiliser le caractère espace dans un nom de clé.
apiVersion: run.tanzu.vmware.com/v1alpha3
kind: TanzuKubernetesCluster
metadata:
  name: string
  namespace: string
  annotations:
    run.tanzu.vmware.com/resolve-os-image: os-name=string 
spec:
  topology:
    controlPlane:
      replicas: int32
      vmClass: string
      storageClass: string
      volumes: 
        - name: string
          mountPath: string
          capacity:
            storage: size in GiB
      tkr:  
        reference:
          name: string
      nodeDrainTimeout: string
    nodePools:
    - name: string
      failureDomain: string
      labels: map[string]string
      taints:
        -  key: string
           value: string
           effect: string
           timeAdded: time
      replicas: int32
      vmClass: string
      storageClass: string
      volumes:
        - name: string
          mountPath: string
          capacity:
            storage: size in GiB
      tkr:  
        reference:
          name: string
      nodeDrainTimeout: string
  settings:
    storage:
      classes: [string]
      defaultClass: string
    network:
      cni:
        name: string
      pods:
        cidrBlocks: [string]
      services:
        cidrBlocks: [string]
      serviceDomain: string
      proxy:
        httpProxy: string
        httpsProxy: string
        noProxy: [string]
      trust: 
        additionalTrustedCAs:
          - name: string
            data: string

API v1alpha3 de TanzuKubernetesCluster - annotée

La spécification annotée répertorie tous les paramètres disponibles pour le provisionnement d'un cluster TanzuKubernetesCluster à l'aide de l'API v1alpha3 avec la documentation de chaque champ.
apiVersion: run.tanzu.vmware.com/v1alpha3
kind: TanzuKubernetesCluster
#valid config key must consist of alphanumeric characters, '-', '_' or '.'
#metadata defines cluster information
metadata:
  #name for this Tanzu Kubernetes cluster
  name: string
  #namespace vSphere Namespace where to provision this cluster
  namespace: string
  #Use annotation to provision non-default OS for the VM nodes
  #PhotonOS is the default OS; use "ubuntu" to specify Ubuntu TKR
  annotations:
    run.tanzu.vmware.com/resolve-os-image: os-name=string
#spec defines cluster configuration
spec:
  #topology describes the number, purpose, organization of nodes 
  #and the resources allocated for each
  #nodes are grouped into pools based on their purpose
  #controlPlane is special kind of a node pool 
  #nodePools is for groups of worker nodes
  #each node pool is homogeneous: its nodes have the same   
  #resource allocation and use the same storage
  topology:
    #controlPlane defines the topology of the cluster 
    #controller, including the number of nodes and  
    #the resources allocated for each 
    #control plane must have an odd number of nodes                              
    controlPlane:
      #replicas is the number of nodes in the pool
      #the control plane can have 1 or 3 nodes
      #NOTE: production deployments require 3 control plane nodes
      #defaults to 1 if nil (empty)
      replicas: int32
      #vmClass is the name of the VirtualMachineClass 
      #which describes the virtual hardware settings 
      #to be used for each node in the node pool 
      #vmClass controls the CPU and memory available   
      #to the node and the requests and limits on 
      #those resources; to list available vm classes run 
      #kubectl get virtualmachineclass
      vmClass: string
      #storageClass to be used for storage of the disks 
      #which store the root filesystems of the nodes 
      #to list available storage classes run
      #kubectl describe storageclasses
      storageClass: string
      #volumes is the optional set of PVCs  
      #to create and attach to each control plane node
      volumes: 
        #name of the PVC to be used as the suffix (node.name)
        - name: string
          #mountPath is the directory where the volume   
          #device is mounted; takes the form /dir/path
          mountPath: string
          #capacity is the PVC capacity
          capacity:
            #storage to be used for the disk
            #volume; if not specified defaults to 
            #spec.controlPlane.storageClass
            storage: size in GiB
      #tkr.reference.name is the TKR NAME 
      #to be used by control plane nodes
      #format is v1.27.11---vmware.1-fips.1-tkg.2
      #currently all tkr.reference.name fields must match
      tkr:  
        reference:
          name: string
      #nodeDrainTimeout is the total amount of time 
      #the controller will spend draining a node  
      #the default value is 0 which means the node is 
      #drained without any time limit    
      nodeDrainTimeout: string
    #nodePools is an array that describes a group of   
    #worker nodes in the cluster with the same configuration
    nodePools:
    #name of the worker node pool
    #must be unique in the cluster
    - name: string
      #failureDomain is the name of a vSphere Zone
      #failureDomain is required for multi-zoned Supervisor
      #in a multi-zoned Supervisor, you will have 3 node pools
      #each refernecing a different failureDomain zone name
      #refer to the examples
      failureDomain: string
      #labels are an optional map of string keys and values  
      #to organize and categorize objects
      #propagated to the created nodes
      labels: map[string]string
      #taints specifies optional taints to register the  
      #Node API object with; user-defined taints are  
      #propagated to the created nodes
      taints:
        #key is the taint key to be applied to a node
        -  key: string
        #value is the taint value corresponding to the key
           value: string
        #effect is the effect of the taint on pods
        #that do not tolerate the taint; valid effects are
        #NoSchedule, PreferNoSchedule, NoExecute
           effect: string
        #timeAdded is the time when the taint was added
        #only written by the system for NoExecute taints
           timeAdded: time
      #replicas is the number of nodes in the pool
      #worker nodePool can have from 0 to 150 nodes
      #value of nil means the field is not reconciled, 
      #allowing external services like autoscalers  
      #to choose the number of nodes for the nodePool
      #by default CAPI's MachineDeployment will pick 1
      #NOTE: a cluster provisioned with 0 worker nodes/nodepools 
      #is not assigned any load balancer services
      replicas: int32
      #vmClass is the name of the VirtualMachineClass 
      #which describes the virtual hardware settings 
      #to be used for each node in the pool 
      #vmClass controls the CPU and memory available   
      #to the node and the requests and limits on 
      #those resources; to list available vm classes run 
      #kubectl get virtualmachineclass
      vmClass: string
      #storageClass to be used for storage of the disks 
      #which store the root filesystems of the nodes 
      #to list available storage classes run
      #kubectl describe ns
      storageClass: string
      #volumes is the optional set of PVCs to create 
      #and attach to each node for high-churn worker node 
      #components such as the container runtime
      volumes: 
        #name of this PVC to be used as the suffix (node.name)
        - name: string
          #mountPath is the directory where the volume   
          #device is mounted; takes the form /dir/path
          mountPath: string
          #capacity is the PVC capacity
          capacity:
            #storage to be used for the disk
            #volume; if not specified defaults to 
            #topology.nodePools[*].storageClass
            storage: size in GiB
      #tkr.reference.name points to the TKR NAME 
      #to be used by spec.topology.nodePools[*] nodes 
      #format is v1.27.11---vmware.1-fips.1-tkg.2
      #currently all tkr.reference.name fields must match
      tkr:  
        reference:
          name: string
      #nodeDrainTimeout is the total amount of time 
      #the controller will spend draining a node  
      #the default value is 0 which means the node is 
      #drained without any time limit    
      nodeDrainTimeout: string
  #settings are optional runtime configurations 
  #for the cluster, including persistent storage 
  #for pods and node network customizations 
  settings:
    #storage defines persistent volume (PV) storage entries 
    #for container workloads; note that the storage used for 
    #node disks is defined by topology.controlPlane.storageClass 
    #and by spec.topology.nodePools[*].storageClass
    storage:
      #classes is a list of persistent volume (PV) storage 
      #classes to expose for container workloads on the cluster  
      #any class specified must be associated with the 
      #vSphere Namespace where the cluster is provisioned
      #if omitted, all storage classes associated with the  
      #namespace will be exposed in the cluster
      classes: [string]
      #defaultClass treats the named storage class as the default
      #for the cluster; because all namespaced storage classes 
      #are exposed if specific classes are not named,
      #classes is not required to specify a defaultClass
      #many workloads, including TKG Extensions and Helm,
      #require a default storage class 
      #if omitted, no default storage class is set
      defaultClass: string
    #netowrk defines custom networking for cluster workloads
    network:
      #cni identifies the CNI plugin for the cluster
      #use to override the default CNI set in the 
      #tkgservicesonfiguration spec, or when customizing  
      #network settings for the default CNI
      cni:
        #name is the name of the CNI plugin to use 
        #supported values are antrea, calico, antrea-nsx-routed
        name: string
      #pods configures custom networks for pods
      #defaults to 192.168.0.0/16 if CNI is antrea or calico
      #defaults to empty if CNI is antrea-nsx-routed
      #custom subnet size must equal or exceed /24
      #use caution before seeting CIDR range other than /16
      #cannot overlap with Supervisor workload network 
      pods:
        #cidrBlocks is an array of network ranges 
        #multiple ranges may not be supported by all CNI plugins
        cidrBlocks: [string]
      #services configures custom network for services
      #defaults to 10.96.0.0/12
      #cannot overlap with Supervisor workload network 
      services:
        #cidrBlocks is an array of network ranges
        #multiple ranges many not be supported by all CNI plugins
        cidrBlocks: [string]
      #serviceDomain specifies the service domain for the cluster
      #defaults to cluster.local
      serviceDomain: string
      #proxy configures proxy server to be used inside the cluster
      #if omitted no proxy is configured 
      proxy:
        #httpProxy is the proxy URI for HTTP connections
        #to endpoints outside the cluster
        #takes form http://<user>:<pwd>@<ip>:<port>
        httpProxy: string
        #httpsProxy is the proxy URL for HTTPS connections 
        #to endpoints outside the cluster
        #takes the frorm http://<user>:<pwd>@<ip>:<port>
        httpsProxy: string
        #noProxy is the list of destination domain names, domains, 
        #IP addresses, and other network CIDRs to exclude from proxying
        #must include Supervisor Cluster Pod, Egress, Ingress CIDRs
        noProxy: [string]
      #trust configures additional certificates for the cluster
      #if omitted no additional certificate is configured
      trust: 
        #additionalTrustedCAs are additional trusted certificates 
        #can be additional CAs or end certificates
        additionalTrustedCAs:
          #name is the name of the additional trusted certificate
          #must match the name used in the filename
          - name: string
            #data holds the contents of the additional trusted cert 
            #PEM Public Certificate data as a base64-encoded string
            #such as LS0tLS1C...LS0tCg== where "..." is the 
            #middle section of the long base64-encoded string
            data: string