vRealize Automation inclut des propriétés que vous pouvez utiliser pour fournir des contrôles supplémentaires aux Blueprints FlexClone.

Tableau 1. Propriétés personnalisées des Blueprints FlexClone

Propriété personnalisée



Specifies the name of a network profile from which to assign a static IP address to network device N or from which to obtain the range of static IP addresses that can be assigned to network device N of a cloned machine, where N=0 for the first device, 1 for the second, and so on.

When you use the VirtualMachine.NetworkN.ProfileName property, the network profile it points to is used to allocate an IP address. However, the provisioned machine is attached to any network that is selected in the reservation using a round-robin fashion model.

Changing this property value after the network is assigned has no effect on the expected IP address values for the designated machines.

With WIM-based provisioning for virtual machines, you can use this property to specify a network profile and network interface or you can use the Network section of the Virtual Reservation page. You can also assign the network interface to a virtual network using the VirtualMachine.NetworkN.Name custom property.

The following attributes of the network profile are available to enable static IP assignment in a cloning blueprint:

  • VirtualMachine.NetworkN.SubnetMask

  • VirtualMachine.NetworkN.Gateway

  • VirtualMachine.NetworkN.PrimaryDns

  • VirtualMachine.NetworkN.SecondaryDns

  • VirtualMachine.NetworkN.PrimaryWins

  • VirtualMachine.NetworkN.SecondaryWins

  • VirtualMachine.NetworkN.DnsSuffix

  • VirtualMachine.NetworkN.DnsSearchSuffixes

VirtualMachine.NetworkN custom properties are specific to individual blueprints and machines. When a machine is requested, network and IP address allocation is performed before the machine is assigned to a reservation. Because blueprints are not guaranteed to be allocated to a specific reservation, do not use this property on a reservation.


Spécifie le nom d'un script de personnalisation optionnel, par exemple config.sh, que l'agent invité Linux exécute une fois que le système d'exploitation a été installé. Cette propriété est disponible pour les machines Linux clonées à partir des modèles sur lesquels l'agent Linux est installé.

Si vous spécifiez un script externe, vous devez également définir son emplacement en utilisant les propriétés Linux.ExternalScript.LocationType et Linux.ExternalScript.Path.


Spécifie le type d'emplacement du script de personnalisation nommé dans la propriété Linux.ExternalScript.Name. Le type d'emplacement peut être local ou nfs.

Vous devez également spécifier l'emplacement du script en utilisant la propriété Linux.ExternalScript.Path. Si le type d'emplacement est nfs, utilisez également la propriété Linux.ExternalScript.Server.


Spécifie le nom du serveur NFS, par exemple lab-ad.lab.local, sur lequel le script de personnalisation externe Linux nommé dans Linux.ExternalScript.Name est situé.


Spécifie le chemin d'accès local au script de personnalisation Linux ou le chemin d'exportation vers la personnalisation Linux sur le serveur NFS. La valeur doit commencer par une barre oblique et ne doit pas inclure le nom du fichier, par exemple /scripts/linux/config.sh.

Si vous avez installé l'agent invité pour personnaliser les machines clonées, la table Propriétés personnalisées pour personnaliser les machines FlexClone avec un agent invité décrit les propriétés personnalisées utilisées le plus fréquemment pour votre situation.

Tableau 2. Propriétés personnalisées pour personnaliser les machines FlexClone avec un agent invité

Propriété personnalisée



If the guest agent is installed as a service on a template for cloning, set to True on the machine blueprint to enable the guest agent service on machines cloned from that template. When the machine is started, the guest agent service is started. Set to False to disable the guest agent. If set to False, the enhanced clone workfow will not use the guest agent for guest operating system tasks, reducing its functionality to VMwareCloneWorkflow. If not specified or set to anything other than False, the enhanced clone workflow sends work items to the guest agent.


Defines the size in GB of disk N. For example, to give a size of 150 GB to a disk G, define the custom property VirtualMachine.Disk0.Size and enter a value of 150. Disk numbering must be sequential. By default a machine has one disk referred to by VirtualMachine.Disk0.Size, where size is specified by the storage value on the blueprint from which the machine is provisioned. The storage value on the blueprint user interface overwrites the value in the VirtualMachine.Disk0.Size property. The VirtualMachine.Disk0.Size property is not available as a custom property because of its relationship with the storage option on the blueprint. More disks can be added by specifying VirtualMachine.Disk1.Size, VirtualMachine.Disk2.Size and so on. VirtualMachine.Admin.TotalDiskUsage always represents the total of the .DiskN.Size properties plus the VMware.Memory.Reservation size allocation.


Specifies the label for a machine’s disk N. The disk label maximum is 32 characters. Disk numbering must be sequential. When used with a guest agent, specifies the label of a machine's disk N inside the guest operating system.


Specifies the drive letter or mount point of a machine’s disk N. The default is C. For example, to specify the letter D for Disk 1, define the custom property as VirtualMachine.Disk1.Letter and enter the value D. Disk numbering must be sequential. When used in conjunction with a guest agent, this value specifies the drive letter or mount point under which an additional disk N is mounted by the guest agent in the guest operating system.


Specifies the time to wait after customization is complete and before starting the guest operating system customization. The value must be in HH:MM:SS format. If the value is not set, the default value is one minute (00:01:00). If you choose not to include this custom property, provisioning can fail if the virtual machine reboots before guest agent work items are completed, causing provisioning to fail.


Set to True to prevent the provisioning workflow from sending work items to the guest agent until all customizations are complete.


Specifies the full path to an application's install script. The path must be a valid absolute path as seen by the guest operating system and must include the name of the script filename.

You can pass custom property values as parameters to the script by inserting {CustomPropertyName} in the path string. For example, if you have a custom property named ActivationKey whose value is 1234, the script path is D:\InstallApp.bat –key {ActivationKey}. The guest agent runs the command D:\InstallApp.bat –key 1234. Your script file can then be programmed to accept and use this value.