Uninstall NSX-T Data Center from a Standalone Host

You can uninstall NSX-T Data Center from a standalone host. Standalone hosts can be ESXi or KVM.

Attenzione: La disinstallazione di NSX-T Data Center da un host ESXi causa un'interruzione se le interfacce fisiche o le interfacce VMkernel sono connesse a N-VDS. Se l'host o il cluster partecipa ad altre applicazioni, come vSAN, la disinstallazione potrebbe influire su tali applicazioni.

Prerequisiti

If you are uninstalling NSX-T Data Center from a standalone ESXi host, verify the following settings:

• Se nell'host sono presenti adattatori VMkernel che devono essere migrati in un altro commutatore durante la disinstallazione, assicurarsi che sia configurata la mappatura della disinstallazione della rete. Vedere Verificare le mappature della rete host per la disinstallazione.

• In vCenter Server attivare la modalità di manutenzione degli host e disattivare le macchine virtuali in esecuzione negli host se si desidera migrare gli adattatori VMkernel durante la disinstallazione.

Procedura

1. From a browser, log in with admin privileges to an NSX Manager at https://<nsx-manager-ip-address>.
2. Select System > Fabric > Nodes > Host Transport Nodes.
3. From the Managed by drop-down menu, select None: Standalone Hosts.
4. Select the host and click Delete. In the confirmation dialog box, by default Uninstall NSX Components is selected. Uncheck Force Delete and click Delete.

   The NSX-T Data Center software is removed from the host. It might take up to 5 minutes for all NSX-T Data Center software to be removed.

5. If the uninstall fails, select the host and click Delete again. In the confirmation dialog box, check Force Delete and click Delete.
   The host transport node is deleted from the management plane, but the host might still have NSX-T Data Center software installed.
6. Verificare che il software NSX-T Data Center sia stato rimosso dall'host.
   1. Accedere all'interfaccia della riga di comando dell'host come root.
   2. Run the appropriate command to check for NSX-T Data Center software packages.

      Tabella 1. Package List Commands

      Host Operating System	Command
      ESXi	esxcli software vib list | grep -E 'nsx|vsipfwlib'
      Red Hat Enterprise Linux and CentOS Linux	rpm -qa | grep -E 'nsx|vsipfwlib'
      Ubuntu	dpkg -l | grep -E 'nsx|vsipfwlib'
      SUSE Linux Enterprise Server	zypper packages --installed-only | grep -E 'nsx|vsipfwlib'

7. (Host on an N-VDS switch) If the host goes into a failed state and NSX-T Data Center VIBs cannot be removed, then run the del nsx command to remove NSX-T Data Center from the host.
   Importante: The del nsx command is not supported on a KVM host. Do not execute this command on a KVM host.
   1. Before running the del nsx command, put the ESXi host in maintenance mode. The vCenter Server does not allow the host to be put in maintenance mode unless all running VMs on the host are in powered off state or moved to a different host.
   2. Log in to the ESXi CLI terminal, run nsxcli -c del nsx.
   3. Read the warning message. Enter Yes if you want to go ahead with NSX-T Data Center uninstallation.
      Carefully read the requirements and limitations of this command:
      1.Read NSX-T documentation for 'Remove a Host from NSX-T Data Center or Uninstall NSX-T Data Center Completely'.
      2.Deletion of this Transport Node from the NSX-T UI or API failed, and this is the last resort.
      3.If this is an ESXi host:
      a.The host must be in maintenance mode.
      b. All resources attached to NSXPGs must be moved out.
      If the above conditions for ESXi hosts are not met, the command WILL fail.
      4. For command progress check /scratch/log/nsxcli.log on ESXi host or /var/log/nsxcli.log on non-ESXi host.
      Are you sure you want to remove NSX-T on this host? (yes/no)
      Importante: After running the del nsx command, do not use the Resolve functionality in the NSX Manager UI to reprepare the host that is in Disconnected state . If you use the Resolve functionality, the host might go into Degraded state.
   4. Verify that the existing VMkernel and physical NICs on the N-VDS switch are migrated to a new vSwitch. If there are more than one N-VDS switches on the host, each N-VDS switch is migrated to a separate vSwitch. For example, If there are N-VDS1, and N-VDS2 switches on the host, the VMkernel adapters and physical NICs are migrated to vSwitch1 and vSwitch 2.
   5. Select each host and click Remove NSX.
   6. In the popup window, select Force Delete and begin uninstallation.
   7. On the ESXi host, verify that system message displayed is Terminated. This message indicates that NSX-T Data Center is completely removed from the host.
      After running del nsx, all existing host switches are removed, VMkernels and physical NICs are migrated to newly created vSwitches, transport node is detached from NSX Manager, and NSX-T Data Center VIBs are removed.

risultati

If the NSX-T Data Center software is successfully removed, no packages are listed. If any NSX software packages remain on the host, contact VMware support.