설치를 마치면 liagent.ini 파일에는 Log Insight Linux Agent에 대해 미리 구성된 기본 설정이 포함됩니다.

vRealize Log Insight Linux Agent liagent.ini 기본 구성

ASCII가 아닌 이름과 값을 사용하는 경우 구성을 UTF-8로 저장합니다.

중앙 구성을 사용하는 경우, 이 파일의 최종 구성이 서버의 설정과 연결되어 liagent-effective.ini 파일을 형성합니다.

서버의 에이전트 페이지에서 설정을 구성하는 것이 더 효율적일 수 있습니다.

[server]
; Hostname or IP address of your Log Insight server / cluster load balancer. Default:
;hostname=LOGINSIGHT

;Enables or deactivates centralized configuration from the vRealize Log Insight server. 
;When enabled, agent configuration changes made to the liagent.ini file on the server
;are joined with the settings in this file. to this agent. Accepted values are yes or no and  0 or 1. 
;The default is yes.
;
;central_config=yes
;
;
; Protocol can be cfapi (Log Insight REST API), syslog. Default:
;proto=cfapi

; Log Insight server port to connect to. Default ports for protocols (all TCP):
; syslog: 514; syslog with ssl: 6514; cfapi: 9000; cfapi with ssl: 9543. Default:
;port=9543

; SSL usage. Default:
;ssl=yes 
; Example of configuration with trusted CA:
;ssl=yes
;ssl_ca_path=/etc/pki/tls/certs/ca.pem

; Time in minutes to force reconnection to the server.
; This option mitigates imbalances caused by long-lived TCP connections. Default:
;reconnect=30

; FIPS mode.
; Possible values are 1 or 0. If omitted the default value is 1.
; ssl_fips_mode=1

[logging]
; Logging verbosity: 0 (no debug messages), 1 (essentials), 2 (verbose with more impact on performance).
; This option should always be 0 under normal operating conditions. Default:
;debug_level=0

[storage]
; Max local storage usage limit (data + logs) in MBs. Valid range: 100-2000 MB.
;max_disk_buffer=2000

; Uncomment the appropriate section to collect system logs
; The recommended way is to enable the Linux content pack from LI server
;[filelog|syslog]
;directory=/var/log
;include=messages;messages.?;syslog;syslog.?
매개 변수 기본값 설명
hostname LOGINSIGHT

vRealize Log Insight 가상 장치의 IP 주소 또는 호스트 이름입니다.

기본값은 loginsight입니다.

central_config yes

이 에이전트에 대한 중앙 집중식 구성을 활성화하거나 비활성화합니다. 중앙 집중식 구성이 비활성화되면 에이전트는 vRealize Log Insight 서버에서 제공하는 구성을 무시합니다. 허용되는 값은 yes, no, 1 또는 0입니다. 기본값은 yes입니다.

proto cfapi

에이전트의 로그 이벤트가 vRealize Log Insight 서버로 전송되는 데 사용되는 프로토콜입니다. 가능한 값은 cfapisyslog입니다.

기본값은 cfapi입니다.

port 9543, 9000, 6514 및 514 에이전트의 이벤트가 vRealize Log Insight 서버로 전송되는 데 사용되는 통신 포트입니다. 기본값은 SSL이 사용되는 cfapi의 경우 9543, SSL이 비활성화된 cfapi의 경우 9000, SSL이 사용되는 syslog의 경우 6514, SSL이 비활성화된 syslog의 경우 514입니다.
ssl yes SSL을 사용하거나 비활성화합니다. 기본값은 yes입니다.

ssl을 [yes]로 설정하고 포트 값을 설정하지 않은 경우 포트 9543이 자동으로 선택됩니다.

max_disk_buffer 200 Log Insight Linux Agent에서 이벤트 및 자체 로그를 버퍼링하는 데 사용하는 MB 단위의 최대 디스크 공간입니다.

지정된 max_disk_buffer에 도달하면 에이전트를 새로 들어오는 이벤트를 삭제하기 시작합니다.

debug_level 0 로그 세부 정보 수준을 정의합니다. Log Insight Agents의 로그 세부 정보 수준 정의 항목을 참조하십시오.
ssl_fips_mode 1 liagent.ini 파일을 통해 Log Insight Linux Agent에 대해 FIPS 모드를 사용하거나 비활성화합니다. 허용되는 값은 1과 0입니다.