作業系統的 Telegraf 組態詳細資料

Linux 作業系統

若要收集 Linux 作業系統相關的度量和內容 (就像在受管理 Telegraf 代理程式安裝流程中一樣)，並且要具有當地語系化的物件類型、名稱、警示、症狀、度量和內容等，應自訂 telegraf.conf 檔案 (對於已安裝的 telegraf，位於 /etc/telegraf/telegraf.conf) 並包含以下內容：

# Read metrics about cpu usage
[[inputs.cpu]]
  ## Whether to report per-cpu stats or not
  percpu = true
  ## Whether to report total system cpu stats or not
  totalcpu = true
  ## If true, collect raw CPU time metrics
  collect_cpu_time = true
  ## If true, compute and report the sum of all non-idle CPU states
  report_active = true

# Read metrics about memory usage
[[inputs.mem]]
  # no configuration

# Read metrics about system load & uptime
[[inputs.system]]
  ## Uncomment to remove deprecated metrics.
  # fielddrop = ["uptime_format"]

# Read metrics about network interface usage
[[inputs.net]]
  ## By default, telegraf gathers stats from any up interface (excluding loopback)
  ## Setting interfaces will tell it to gather these explicit interfaces,
  ## regardless of status.
  ##
 # interfaces = ["eth0"]

# Read metrics about swap memory usage
[[inputs.swap]]
  # no configuration

# Read metrics about disk usage by mount point
[[inputs.disk]]
  ## By default stats will be gathered for all mount points.
  ## Set mount_points will restrict the stats to only the specified mount points.
  # mount_points = ["/"]

  ## Ignore mount points by filesystem type.
  # ignore_fs = ["tmpfs", "devtmpfs", "devfs", "iso9660", "overlay", "aufs", "squashfs"]

# Get the number of processes and group them by status
[[inputs.processes]]
  # no configuration

# Read metrics about disk IO by device
[[inputs.diskio]]
  ## By default, telegraf will gather stats for all devices including
  ## disk partitions.
  ## Setting devices will restrict the stats to the specified devices.
  # devices = ["sda", "sdb", "vd*"]
  ## Uncomment the following line if you need disk serial numbers.
  # skip_serial_number = false

Windows 作業系統

若要收集 Windows 作業系統相關的度量和內容 (就像在受管理 Telegraf 代理程式安裝流程中一樣)，並且要具有當地語系化的物件類型、名稱、警示、症狀、度量和內容等，應自訂 telegraf.conf 檔案並包含以下內容。

對於 Windows 作業系統，版本大於或等於 1.20.0 的 Telegraf 的 telegraf.conf 檔案預設組態已變更，現包括 Linux 相關的輸入外掛程式 (如 inputs.cpu, inputs.disk, inputs.diskio, inputs.kernel, inputs.mem, inputs.processes, inputs.swap, inputs.system 等)。應對其加上註解，並且應取消與 Windows 相關的外掛程式的註解。

[[inputs.win_perf_counters]]
PrintValid=true

[[inputs.win_perf_counters.object]]
  ObjectName = "Processor"
  Instances = ["*"]
  Counters = ["% Idle Time", "% Interrupt Time", "% Privileged Time", "% Processor Time", "% User Time", "Interrupts/sec", "% DPC Time"]
  Measurement = "win.cpu"
  IncludeTotal = true

[[inputs.win_perf_counters.object]]
  ObjectName = "LogicalDisk"
  Instances = ["*"]
  Counters = ["% Disk Read Time", "% Disk Write Time", "% Free Space", "% Idle Time", "Avg. Disk Bytes/Read", "Avg. Disk Bytes/Write", "Avg. Disk Queue Length", "Avg. Disk sec/Read", "Avg. Disk sec/Write", "Avg. Disk Write Queue Length", "Avg. Disk Read Queue Length", "Free Megabytes", "Split IO/Sec"]
  Measurement = "win.disk"

[[inputs.win_perf_counters.object]]
  ObjectName = "Memory"
  Counters = ["Available Bytes", "Cache Bytes", "Committed Bytes", "Cache Faults/sec", "Demand Zero Faults/sec", "Page Faults/sec", "Pages/sec", "Transition Faults/sec", "Pool Nonpaged Bytes", "Pool Paged Bytes"]
  Instances = ["------"]
  Measurement = "win.mem"

[[inputs.win_perf_counters.object]]
  ObjectName = "Network Interface"
  Counters = ["Bytes Received/sec", "Bytes Sent/sec", "Packets Outbound Discarded", "Packets Outbound Errors", "Packets Received Discarded", "Packets Received Errors", "Packets Received/sec", "Packets Sent/sec", "Connections Established"]
  Instances = ["*"]
  Measurement = "win.net"
  IncludeTotal = true

[[inputs.win_perf_counters.object]]
  ObjectName = "Paging File"
  Counters = ["% Usage"]
  Instances = ["*"]
  Measurement = "win.paging"
  IncludeTotal = true

  [[inputs.win_perf_counters.object]]
    ObjectName = "Process"
    Counters = ["% Privileged Time", "% Processor Time", "% User Time", "Elapsed Time", "Handle Count", "IO Read Bytes/sec", "IO Read Operations/sec", "IO Write Bytes/sec", "IO Write Operations/sec", "Private Bytes", "Thread Count", "Virtual Bytes", "Working Set", "Working Set - Private"]
    Instances = ["_Total", "telegraf", "w3wp"]         # Replace this with a list of process names that you want to monitor. "_Total" is all processes combined
    Measurement = "win.process"

[[inputs.win_perf_counters.object]]
  ObjectName = "System"
  Counters = ["Context Switches/sec", "Processes", "Processor Queue Length", "System Calls/sec", "System Up Time", "Threads"]
  Instances = ["------"]
  Measurement = "win.system"

[[inputs.win_perf_counters.object]]
  ObjectName = "TCPv4"
  Counters = ["Connection Failures", "Connections Active", "Connections Established", "Connections Passive", "Connection Reset", "Segments Received/sec", "Segments Retransmitted/sec", "Segments Sent/sec"]
  Instances = ["------"]
  Measurement = "win.net.tcp"

[[inputs.win_perf_counters.object]]
  ObjectName = "TCPv6"
  Counters = ["Connection Failures", "Connections Active", "Connections Established", "Connections Passive", "Connection Reset", "Segments Received/sec", "Segments Retransmitted/sec", "Segments Sent/sec"]
  Instances = ["------"]
  Measurement = "win.net.tcp"

[[inputs.win_perf_counters.object]]
  ObjectName = "UDPv4"
  Counters = ["Datagrams No Port/sec", "Datagrams Received/Errors", "Datagrams Received/sec", "Datagrams Sent/sec"]
  Instances = ["------"]
  Measurement = "win.net.udp"

[[inputs.win_perf_counters.object]]
  ObjectName = "UDPv6"
  Counters = ["Datagrams No Port/sec", "Datagrams Received/Errors", "Datagrams Received/sec", "Datagrams Sent/sec"]
  Instances = ["------"]
  Measurement = "win.net.udp"