A Cloud Proxy receives log and event information from monitored sources and sends this information to VMware Aria Operations for Logs (SaaS) where it can be queried and analyzed. While configuring a Cloud Proxy, you must stay at or below the supported maximums for HTTP and syslog requests.

Important:

The Cloud Proxy is deprecated. You can continue to use your existing Cloud Proxy configurations, but there will be no new feature updates to the Cloud Proxy.

The default configuration for Cloud Proxy is 4 vCPUs and 12 GB RAM. You can use a Cloud Proxy for an on-premise vCenter VM instance with a lower bandwidth (up to 100 MBps).

The following resource limits are applicable for log forwarders deployed in the Cloud Proxy:
Note: The following values are for non-SSL ports. You will experience a 15% drop in throughput when you use SSL ports.
Configuration Maximum Number of Log Filter Rules with Filter at Source Maximums for HTTP Requests Maximums for Syslog TCP Requests
1 CPU; 1 GB memory 5

1400 requests per second

or 20 MBps

10,500 messages per second

or 3.2 MBps

2 CPUs; 4 GB memory 10

2500 requests per second

or 48 MBps

17,700 messages per second

or 5.4 MBps

4 CPUs; 8 GB memory 20

3800 requests per second

or 63 MBps

36,000 messages per second

or 11 MBps

8 CPUs, 16 GB memory 30

5900 requests per second

or 100 MBps

75,000 messages per second

or 26 MBps

Note:
  • For a log forwarder configuration of 4 CPUs and 8 GB memory, increase the Cloud Proxy configuration to at least 6 CPUs and 12 GB memory.
  • For a log forwarder configuration of 8 CPUs and 16 GB memory, increase the Cloud Proxy configuration to at least 10 CPUs and 18 GB memory.
  • If you activate log filter rules with filter at source enabled, you might observe up to a 30% drop in throughput. For example, if you are using a non-SSL 1 CPU and 1 GB memory configuration, VMware Aria Operations for Logs (SaaS) suppports 1400 requests per second or 20 MBps. For this configuration, activating up to 5 log filter rules results in a 30% drop in throughput, which translates to 1000 requests per second or 14 MBps. In this situation, you can upgrade your configuration to maintain the throughput.