Configure the Network on VMware Cloud Foundation Hosts

After the initial boot, use the ESXi Direct Console User Interface (DCUI) for host network configuration and administrative access.

Perform the following tasks to configure the host network settings:

• Configure the network adapter (vmk0) and VLAN ID for the Management Network.
• Configure the IP address, subnet mask, gateway, DNS server, and FQDN for the ESXi host.

Procedure

1. Open the DCUI of the ESXi host.
   1. Open a console window to the host.
   2. Press F2 to enter the DCUI.
   3. Log in by using the esxi_root_user_password.
2. Configure the network.
   1. Select Configure Management Network and press Enter.
   2. Select VLAN (Optional) and press Enter.
   3. Enter the VLAN ID for the Management Network and press Enter.
   4. Select IPv4 Configuration and press Enter.
   5. Select Set static IPv4 address and network configuration and press the Space bar.
   6. Enter the IPv4 Address, Subnet Mask and Default Gateway and press Enter.
   7. Select DNS Configuration and press Enter.
   8. Select Use the following DNS Server address and hostname and press the Space bar.
   9. Enter the Primary DNS Server, Alternate DNS Server and Hostname and press Enter.
   10. Select Custom DNS Suffixes and press Enter.
   11. Ensure that there are no suffixes listed and press Enter.
3. Press Escape to exit and press Y to confirm the changes.
4. Repeat this procedure for all remaining hosts.