Supported features of Cisco UCS lists the supported features of Cisco UCS.

Table 1. Supported features of Cisco UCS

Components

Description

Supported features

Cisco UCS Chassis

The Cisco UCS 5100 Series Blade Server Chassis is a crucial building block of the Cisco UCS.

  • Up to eight half-width Cisco UCS B-Series Blade Servers (both half and full-width blade form factors).

  • Four single-phase, hot-swappable power supplies on the Front of the chassis.

  • Eight hot-swappable fans on the Rear of the chassis.

  • Four power connectors (one per power supply) on the Rear of the chassis.

Fabric Extenders

The Cisco UCS 2100 Series Fabric Extenders fit into the back of the Cisco UCS 5100 Series chassis.

  • Up to two fabric extenders, enabling redundancy.

  • Four 10 Gigabit Ethernet, FCoE-capable, Small Form-Factor Pluggable Plus (SFP+) ports that connect the blade chassis to the fabric interconnect.

  • Eight 10 Gigabit Ethernet ports connected through the midplane to each half-width slot in the chassis.

Blade Server

Cisco UCS B200 M1 Blade Server

It is a half-width, two-socket blade server.

  • Two Intel Xeon 5500 Series processors.

  • Up to 96 GB of DDR3 memory.

  • Two optional hot-swappable small form factor (SFF) serial attached SCSI (SAS) disk drives.

  • One mezzanine connector for up to 20 Gbps of I/O throughput.

Cisco UCS B250 M1 Blade Server

It is a full-width, two-socket blade server featuring Cisco Extended Memory Technology.

  • Supports two Intel Xeon 5500 Series processors.

  • Supports up to 384 GB of DDR3 memory.

  • Two optional SFF SAS disk drives.

  • Two mezzanine connections for up to 40 Gbps of I/O throughput.

Cisco UCS B200 M2 Blade Server

It is a half-width, two-socket blade server.

  • Two Intel Xeon 5600 Series Processors

  • Supports up to 96 GB of DDR3 memory

  • Two optional hot-swappable small form factor (SFF) serial attached SCSI (SAS) disk drives

  • One mezzanine connector for up to 20 Gbps of I/O throughput.

Blade Server(continued)

Cisco UCS B250 M2 Blade Server

It is a full-width, two-socket blade server featuring Cisco Extended Memory Technology.

  • Two Intel Xeon 5600 Series Processors.

  • Up to 384 GB of DDR3 memory.

  • Two optional SFF SAS disk drives.

  • Two mezzanine connections for up to 40 Gbps of I/O throughput.

Cisco UCS B440 M1 Blade Server

It is a high-Performance, full-width, four-socket Blade server.

  • Two or four Intel Xeon 7500 Series Processors.

  • 32 dual in-line memory module (DIMM) slots and up to 256 GB at 1333 MHz.

  • 40 nanometer class (DDR3) technology.

  • Four optional front-accessible, hot-swappable Small Form-Factor Pluggable (SFFP) drives and an LSI.

  • SAS2108 RAID Controller.

  • Two dual-port mezzanine cards for up to 40 Gbps I/O per blade.

Fabric Interconnect

  • Ethernet module that provides six ports of 10 Gigabit Ethernet using the SFP+ interface.

  • Fiber Channel plus Ethernet module that provides four ports of 10 Gigabit Ethernet using the SFP+ interface, and four ports of 1/2/4-Gbps native Fiber Channel connectivity using the SFP interface.

  • Fiber Channel module that provides eight ports of 1/2/4-Gbps native Fiber Channel using the SFP interface for transparent connectivity with existing Fiber Channel networks.

  • Fibre Channel module that provides six ports of 1/2/4/8-Gbps native Fibre Channel using the SFP or SFP+ interface for transparent connectivity with existing Fibre Channel networks.