Attributes of WirelessAccessPoints lists the attributes of WirelessAccessPoints.

Table 1. Attributes of WirelessAccessPoints

Attributes

Description

Values

AccessMode

The mode to access a system. It can have one of the following values: ICMPONLY, SNMPONLY, or ICMPSNMP.

Enum

WirelessAccessPointMode

Mode of the access point. Values can be master, adhoc or monitor.

String

BSSID

The Basic Service Set IDentifier that uniquely identifies the BSS.

String

BridgeAddress

The bridge address as defined in RFC1493.

String

Certification

The Certification attribute defines the level of certification that this device has in the discovery process:

UNSUPPORTED deprecated.

GENERIC indicates that the OID for the device is not recognized and the device will be classified as GENERIC and added to the Node class. Standard MIB-II data is used to perform analysis on the device.

TEMPLATE indicates that the device's certification is provided based on a family of devices it is part of it, but the completeness of the certification is not observed.

CERTIFIED indicates that the device has the highest level of certification and is discovered using enterprise MIBs as well as standard MIB-II data.

VALIDATED deprecated.

UNDISCOVERED indicates the system is undiscovered.

Enum

Channel

The current operating frequency channel.

Integer

DesignatedRoot

The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this Bridge. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node.

String

DesignatedRootPort

The port number of the port which offers the lowest cost path from this Bridge to the root Bridge.

ESSID

The Extended Service Set IDentifier that uniquely identifies the ESS.

String

IsRogue

Indicates whether this WirelessAccessPoint is a Rogue WirelessAccessPoint or not.

A rogue access point is a wireless access point that has either been installed on a secure company network without explicit authorization from a local network administrator, or has been created to allow a hacker to conduct a man-in-the-middle attack.

Boolean:

TRUE, FALSE

Default value: FALSE.

RogueType

Indicates the type of identified Rogue WirelessAccessPoint.

Values can be:

  • valid

  • interfering

  • unsecure

  • dos

  • unknown

  • knownInterfering

  • suspectedUnsecure

  • initializing

  • pending

  • alert

  • detectedLrad

  • known

  • acknowledge

  • contained

  • threat

  • containedPending

  • knownContained

  • trustedMissing

Default value: Uninitialized

IsSeed

TRUE if the system is added as seed.

Boolean:

TRUE, FALSE

IsThinClient

Indicates whether the WirelessAccessPoint is a thin client or not.

Boolean:

TRUE, FALSE

PhysicalLayerProtocol

The physical layer support protocol for the WirelessAccessPoint.

String

RemoveComponents

Enable or disable component deletion functionality for ICIM_System instances. This is used by remove() function. Default value is set to FALSE.

Boolean:

TRUE, FALSE

SourceAddress

The system level source address. All the IP addresses that hosted by the system use the address as source address unless each IP address has its own source address.

String:

0.0.0.0

WirelessClientThreshold

Maximum number of WirelessClient devices that can be associated with this WirelessAccessPoint at a given time.

Integer

SystemObjectID

The System Object Identifier associated with the Vendor of this system.

String