ForwarderEndpoint SNMP Setting

The ForwarderEndpoint SNMP Setting determines the polling intervals that are used by MPLS Manager to monitor ForwarderEndpoints. MPLS Manager monitors the endpoints by probing the SNMP tables on the PE devices.

ForwarderEndpoint SNMP Setting parameters and their values lists the ForwarderEndpoint SNMP Setting parameters.

Table 1. ForwarderEndpoint SNMP Setting parameters and their values

Parameter	Values	Description
AnalysisMode	ENABLED,DISABLED Default: ENABLED	Enables or disables: The MPLS Manager polling of Forwarder endpoint (ForwarderEndpoint) data. The subsequent analysis of the polled data to determine the status of Forwarder endpoint connections.
PollingInterval	30 to 3600 seconds Default: 240 seconds	Sets the time between successive polls.
Retries	0 to 10 retries Default: 3	Sets the number of retry polls to perform when the initial poll fails.
Timeout	10 to 10000 milliseconds Default: 700 milliseconds	Sets the amount of time to wait for the poll response before the first poll request times out. The timeout value doubles for each successive retry. For Timeout=700 msec (0.7 sec) and Retries=3: 0.7 seconds for first retry 1.4 seconds for second retry 2.8 seconds for third retry