Sample Configuration Text

r2621(config-if)#ip ospf ?
  authentication       Enable authentication
  authentication-key   Authentication password (key)
  cost                 Interface cost
  database-filter      Filter OSPF LSA during synchronization and flooding
  dead-interval        Interval after which a neighbor is declared dead
  demand-circuit       OSPF demand circuit
  hello-interval       Time between HELLO packets
  message-digest-key   Message digest authentication password (key)
  mtu-ignore           Ignores the MTU in DBD packets
  network              Network type
  priority             Router priority
  retransmit-interval  Time between retransmitting lost link state
                       advertisements
  transmit-delay       Link state transmit delay

InterfaceOspfSettings attributes lists attributes supported by InterfaceOspfSettings.

Table 1. InterfaceOspfSettings attributes

Display name	Type	Description
AreaId	String	Area ID for this interface / virtual link.
BFDInterval	Integer	Bidirectional forwarding detection interval.
BFDMultiplier	Integer	Bidirectional forwarding detection multiplier OSPF setting.
BFDReceiveInterval	Integer	Bidirectional forwarding detection receive interval OSPF setting.
BFDTransmitInterval	Integer	Bidirectional transmit interval OSPF setting.
BFDVersion	Integer	Bidirectional forwarding detection protocol version.
BackupDesignatedRouterId	String	The Router Id of the Backup Designated Router for this network.
BackupDesignatedRouterIpAddress	IpAddressString	The IpAddress of the Backup Designated Router for this network.
Cost	Integer	Cost of this interface.
DBFilter	Boolean	DB filter OSPF setting.
DRPriority	Integer	Retransmit interval OSPF protocol setting.
DeadInterval	Integer	Dead interval OSPF protocol setting.
DemandCircuit	Boolean	Demand circuit boolean OSPF setting.
DesignatedRouterId	String	The Router Id of the Designated Router for this network.
DesignatedRouterIpAddress	IpAddressString	The IpAddress of the Designated Router for this network.
Disable	Boolean	Disables OSPF on this interface.
FloodReduction	Boolean	Flood reduction boolean OSPF setting.
HelloInterval	Integer	Hello interval OSPF protocol setting.
Interface	String	Name of interface containing these OSPF settings.
IpAddress	IpAddressString	IpAddress used for OSPF traffic.
KeyName	String	Key name of global authorization key.
MTUIgnore	Boolean	MTU ignore boolean OSPF setting.
NameLookup	Boolean	Name lookup boolean OSPF setting.
Passive	Boolean	Indicates the interface should be passive with respect to making OSPF connections.
PollInterval	Integer	The poll interval setting in seconds.
RDN	String	RDN (device server key).
RetransmitInterval	Integer	Retransmit interval OSPF protocol setting.
State	String	State of this interface, typically DR (designated router), BDR (backup designated router), DOWN, POINT-TO-POINT, others TBD.
TECost	Integer	Traffic engineering cost OSPF setting.
TransmitDelay	Integer	Retransmit interval OSPF protocol setting.