Converged CallManager Polling - SNMP setting

The Converged CallManager Polling - SNMP setting configures availability monitoring of discovered converged call managers. The monitoring is accomplished by sending periodic SNMP requests to the call manager to obtain status.

Parameters for the Converged CallManager Polling - SNMP setting lists the parameters for the Converged CallManager Polling - SNMP polling setting.

Table 1. Parameters for the Converged CallManager Polling - SNMP setting

Parameter	Default value	Description
AnalysisMode	ENABLED,DISABLED Default: ENABLED	Enables or disables the monitoring of converged call managers.
PollingInterval	30 to 3600 seconds Default: 240 seconds	Time between successive availability polls.
Retries	0 to 10 retries Default: 1	Number of retry connectivity polls to perform when the initial poll fails.
Timeout	10 to 10000 milliseconds Default: 10000 milliseconds	Amount of time to wait for the poll response before the first poll request times out. The timeout value doubles for each successive retry. For Timeout=700 msec (0.7 sec) and Retries=3: 0.7 seconds for first retry 1.4 seconds for second retry 2.8 seconds for third retry