r2621(config)#router ospf 100 r2621(config-router)#? Router configuration commands: area OSPF area parameters auto-cost Calculate OSPF interface cost according to bandwidth capability Enable specific OSPF feature compatible OSPF compatibility list default Set a command to its defaults default-information Control distribution of default information default-metric Set metric of redistributed routes discard-route Enable or disable discard-route installation distance Define an administrative distance distribute-list Filter networks in routing updates domain-id OSPF domain-id domain-tag OSPF domain-tag exit Exit from routing protocol configuration mode help Description of the interactive help system ignore Do not complain about specific event log-adjacency-changes Log changes in adjacency state maximum-paths Forward packets over multiple paths neighbor Specify a neighbor router network Enable routing on an IP network no Negate a command or set its defaults passive-interface Suppress routing updates on an interface redistribute Redistribute information from another routing protocol router-id router-id for this OSPF process summary-address Configure IP address summaries timers Adjust routing timers traffic-share How to compute traffic share over alternate paths
OspfRouterSettings attributes lists attributes supported by OspfRouterSettings.
| Display name |
Type |
Description |
|---|---|---|
| AdminDistance |
Integer |
Specifies the preference of the routing protocol (OSPF) over other protocols in the router. |
| AdminDistanceCIDR |
String |
CIDR of AdminDistanceIp |
| AdminDistanceIp |
String |
Local Admin distance is set by neighbors within the IP address range (IP and Mask) of network specified. |
| AdminDistanceNetmask |
String |
Local Admin distance is set by neighbors within the IP address range (IP and Mask) of network specified. |
| DefaultInfo |
Boolean |
Boolean - advertise default route information into area. |
| DefaultInfoType |
String |
Specifies the type of information in the DefaultInfo field as always, metric, metric-type or route map or blank |
| DefaultMetric |
Integer |
Sets the OSPF default metric. |
| DemandRetransmission |
Integer |
Demand retransmission parameter. |
| Disable |
Boolean |
Disable OSPF instance (JunOS) |
| DiscardDirection |
Integer |
Discard direction: internal OR external. |
| DomainId |
String |
OSPF domain ID that is used during the redistribution of BGP |
| DomainIdCIDR |
String |
-- |
| DomainTag |
Integer |
OSPF domain tag (32 bit value) that is used for LSA type 5 & type 7 LSAs |
| ExportPolicy |
String |
Export policy string. |
| ExternalAdminDistance |
Integer |
Administrative Distance on External routes |
| ExternalPreference |
Integer |
External preference value. |
| FloodPacing |
Integer |
Cisco timer configuration |
| GRDisable |
Boolean |
Graceful Restart disable |
| GRHelperDisable |
Boolean |
Disable graceful restart capability |
| GRNotifyDuration |
Integer |
graceful restart timer to send all max-aged grace LSAs |
| GRRestartDuration |
Integer |
graceful restart timer for all neighbors to become full |
| IgnoreMOSPF |
Boolean |
To suppress the sending of syslog messages when the router receives link-state advertisement (LSA) Type 6 Multicast OSPF (MOSPF) packets |
| ImportPolicy |
String |
Import policy string. |
| InterAreaAdminDistance |
Integer |
Administrative Distance on Inter-area routes |
| IntraAreaAdminDistance |
Integer |
Administrative Distance on Intra-area routes |
| LSAGroupPacing |
Integer |
Interval between group of LSA being refreshed or max-aged. |
| LogAdjacency |
String |
Log adjacency events. |
| MaxPaths |
Integer |
Maximum number of Equal Cost Paths |
| NonDemandRetransmission |
Integer |
Retransmission time for non-demand retransmissions. |
| Opaque |
Boolean |
Enable OSPF opaque capability. |
| OspfTimerDelay |
Integer |
Ospf timer parameter. |
| OspfTimerHold |
Integer |
Ospf timer parameter. |
| OspfTimerType |
String |
Ospf timer parameter. |
| OspfTrap |
String |
HP Procurve specific OSPF Trap setting |
| Overload |
Boolean |
Set the overload mode (repel transit traffic) |
| OverloadTimeout |
Integer |
Time after which overload mode is reset |
| PassiveInterface |
String |
Disables route updates on an interface (receive only). |
| PrefixLimit |
Integer |
Maximum number of Prefixes that can be exported |
| ProcessId |
Integer |
The process id for these ospf routing settings (distinguishes multiple ospf instances). |
| RDN |
String |
Device services key. |
| RFC1583 |
Boolean |
Enables RFC 1583 compatibility. |
| RefBandwidth |
Integer |
OSPF Reference Bandwidth adjustment |
| RetransmissionPacing |
Integer |
Cisco timer setting. |
| RibGroup |
String |
RIB group name. |
| RouterId |
String |
OSPF router ID in IP address format. |
| RouterIdCIDR |
String |
CIDR representing router id. |
| RoutingPreference |
Integer |
OSPF router preference value (Juniper). |
| SPFDelay |
Integer |
Delay between receiving a change to SPF calculations. |
| SPFDeltaDelay |
Integer |
SPF delta delay. |
| SPFHold |
Integer |
Hold time between consecutive SPF calculations. |
| SummaryIPAddress |
String |
Summary Address and Mask for external routes within OSPF. |
| SummaryIPCIDR |
String |
CIDR value generated from SummaryIpAddress and SummaryNetMask. |
| SummaryNetMask |
String |
Summary Address and Mask for external routes within OSPF. |
| TEDisable |
Boolean |
Traffic engineering disable. |
| TENoTopology |
Boolean |
Disable dissemination of TE link-state topology information |
| TEShortcuts |
Boolean |
Use label-switched paths as next hops |
| TEShortCutsMetric |
Boolean |
Use LSA metric info summary. |
| TrafficShare |
Boolean |
Alters the path computations for alternative paths. |
| VRFName |
String |
Specifies the name of the VRF for the configuration (related to IP VPNs). |
