Threshold groups for system resources are used to configure parameters for system analysis. The sensitivity of the system thresholds is determined by the role of the system.

Default system resource threshold groups for the IP Manager shows the default system resource threshold groups, their target classes and matching criteria, and their default settings. The target class for all system resource threshold groups is UnitaryComputerSystem.

Table 1. Default system resource threshold groups for the IP Manager

System resource group

Target class and matching criteria

Default threshold settings

Switches

UnitaryComputerSystem with attributes:

  • IsManaged = TRUE

  • Type = SWITCH

  • CreationClassName=~WirelessController|~WirelessAccessPoint

Connectivity

Environment

Processor and Memory

Routers

UnitaryComputerSystem with attributes:

  • IsManaged = TRUE

  • Type = ROUTER

Connectivity

Environment

Processor and Memory

Hubs and Bridges

UnitaryComputerSystem with attributes:

  • IsManaged = TRUE

  • Type = HUB|BRIDGE

Connectivity

Environment

Processor and Memory

Other Systems

UnitaryComputerSystem with attribute:

  • IsManaged = TRUE

Connectivity

Environment

FileSystem

Processor and Memory

ComputeFabric

  • Description = ~*Version*\([0-1].[0-3]*\),*

  • SystemObjectID = .1.3.6.1.4.1.9.12.3.1.3.847|.1.3.6.1.4.1.9.12.3.1.3.899||.1.3.6.1.4.1.9.12.3.1.3.1062

Connectivity

Environment

Processor and Memory

WirelessControllers

Note:

The priority of groups should be adjusted as required in both Polling tabs and Threshold Tab for System Resource Groups.

CreationClassName = WirelessController

Connectivity

Environment

Processor and Memory

WirelessController Thresholds

Note:

GUID-184C2DCF-1E13-41C4-9CDF-E3F35C5B5F0B.html#GUID-184C2DCF-1E13-41C4-9CDF-E3F35C5B5F0B___REFERENCE_POLLING_THRESHOLDS_40516 lists the parameters for WirelessControllers Thresholds.

WirelessAccessPoints

Note:

The priority of groups should be adjusted as required in both Polling tabs and Threshold Tab for System Resource Groups.

CreationClassName = WirelessAccesspoints

Connectivity

Environment

Processor and Memory

WirelessAccessPoints Thresholds

Note:

GUID-184C2DCF-1E13-41C4-9CDF-E3F35C5B5F0B.html#GUID-184C2DCF-1E13-41C4-9CDF-E3F35C5B5F0B___REFERENCE_POLLING_THRESHOLDS_86195 lists the parameters for WirelessAccessPoints Thresholds.

MediaGateway

Type = MEDIAGATEWAY

Connectivity

Environment

Processor and Memory

Two things to note about Default system resource threshold groups for the IP Manager:

  • The default group-to-setting mappings in the table are the mappings that users would typically use. The settings that are available to a system resource threshold group are as follows:

    • Cisco Fast and NvRam Memory

    • Connectivity

    • Environment

    • FileSystem

    • Interface Management Policy

    • Juniper Environment

    • Processor and Memory

    • VLAN Tagging Policy

  • The “Other Systems” group has the lowest priority. Managed systems that do not match the criteria for the other system resource threshold groups become members of the Other Systems group. For example, managed host systems become members of the Other Systems group.