Use the interface-matching filters in the tpmgr-param.conf configuration file as a starting point to configure interface-matching filters for access devices. The tpmgr-param.conf file contains the IFTypePattern and IFDescrPattern interface-matching filters that are listed in IFTypePattern and IFDescrPattern interface-matching filters. Modify any of these filters or add your own filters to the file.
Currently, the tpmgr-param.conf file does not contain any IFIndexPattern interface-matching filters; thus, by default, those filters are set to ~*.
| Device |
Interface pattern type and device |
Interface-matching pattern |
|---|---|---|
| Ascend Max-1800 Switch |
IFTypePattern-.1.3.6.1.4.1.529.1.2.2 |
~1 Interface type definitions: 1 = other (generic)
Note:
For any discovered device that matches the sysObjectID of this filter, any interface that has an ifType value other than 1 will match this filter and therefore be created. |
| Ascend Max-2000 Switch |
IFTypePattern-.1.3.6.1.4.1.529.1.2.3 |
|
| Ascend Max-3000 Switch |
IFTypePattern-.1.3.6.1.4.1.529.1.2.9 |
|
| Cisco 861W Router |
IFDescrPattern-.1.3.6.1.4.1.9.1.834 |
SSLVPN*|wlan*|Vlan*
Note:
For any discovered device that matches the sysObjectID of this filter, any interface that has an ifDescr description that contains SSLVPN, wlan, or Vlan will match this filter and therefore be created. |
| Cisco IOS 6509 NEB Router |
IFTypePattern-.1.3.6.1.4.1.9.1.310 |
~51 Interface type definitions: 51 => sonetVT |
| Paradyne 3160 Probe |
IFTypePattern-.1.3.6.1.4.1.1795.1.14.2.2.1 |
~* |
| IFDescrPattern-.1.3.6.1.4.1.1795.1.14.2.2.1 |
~COM*|~Modem*|~DTE*|~AUX*
Note:
For any discovered device that matches the sysObjectID of this filter, any interface that has an ifDescr description that does not contain COM, Modem, DTE, or AUX will match this filter and therefore be created. |
|
| Paradyne T1 SLV Model 9124 Probe |
IFTypePattern-.1.3.6.1.4.1.1795.1.14.2.4.4.5 |
~* |
| IFDescrPattern-.1.3.6.1.4.1.1795.1.14.2.4.4.5 |
~RMON*|~DSX-1* |
|
| Paradyne DDS SLV Model 9626 Probe |
IFTypePattern-.1.3.6.1.4.1.1795.1.14.2.4.1.6 |
~* |
| IFDescrPattern-.1.3.6.1.4.1.1795.1.14.2.4.1.6 |
~RMON*|~COM*|~Modem* |
|
| Paradyne DDS SLV Model 9624-OS Probe |
IFTypePattern-.1.3.6.1.4.1.1795.1.14.2.4.1.8 |
~* |
| IFDescrPattern-.1.3.6.1.4.1.1795.1.14.2.4.1.8 |
~RMON*|~COM* |
|
| Paradyne T1 SLV Model 9126-IISLV Probe |
IFTypePattern-.1.3.6.1.4.1.1795.1.14.2.4.4.7 |
~* |
| IFDescrPattern-.1.3.6.1.4.1.1795.1.14.2.4.4.7 |
~RMON*|~Modem*|~DSX-1*|~Ethernet* |
|
| Paradyne T1 SLV Model 9128-II Probe |
IFTypePattern-.1.3.6.1.4.1.1795.1.14.2.4.4.8 |
~* |
| IFDescrPattern-.1.3.6.1.4.1.1795.1.14.2.4.4.8 |
~RMON*|~DSX-1*|~COM*|~Modem* |
|
| Paradyne T1 SLV Model 9124-II Probe |
IFTypePattern-.1.3.6.1.4.1.1795.1.14.2.4.4.9 |
~* |
| IFDescrPattern-.1.3.6.1.4.1.1795.1.14.2.4.4.9 |
~RMON*|~DSX-1* |
|
| Paradyne T1 FLEX Model 9123-C Probe |
IFTypePattern-.1.3.6.1.4.1.1795.1.14.2.4.4.11.1 |
~* |
| IFDescrPattern-.1.3.6.1.4.1.1795.1.14.2.4.4.11.1 |
~COM* |
|
| Paradyne T1 FLEX Model 9123-SLV Probe |
IFTypePattern-.1.3.6.1.4.1.1795.1.14.2.4.4.11.2 |
~* |
| IFDescrPattern-.1.3.6.1.4.1.1795.1.14.2.4.4.11.2 |
~RMON*|~COM* |
|
| Paradyne T1 SLV Model 9124-OS Probe |
IFTypePattern-.1.3.6.1.4.1.1795.1.14.2.4.4.12 |
~* |
| IFDescrPattern-.1.3.6.1.4.1.1795.1.14.2.4.4.12 |
~RMON*|~DSX-1* |
|
| Paradyne T3 DSU/CSU Model 9520-II Probe |
IFTypePattern-.1.3.6.1.4.1.1795.1.14.2.4.5.3 |
~* |
| IFDescrPattern-.1.3.6.1.4.1.1795.1.14.2.4.5.3 |
~RMON*|~COM*|~Modem* |
|
| Paradyne T1 DSU/CSU Model 7123 Probe |
IFTypePattern-.1.3.6.1.4.1.1795.1.14.2.4.12.1.1 |
~* |
| IFDescrPattern-.1.3.6.1.4.1.1795.1.14.2.4.12.1.1 |
~COM* |
|
| Radware IP-mux1 Router |
IFTypePattern-.1.3.6.1.4.1.164.6.1.3.82 |
~80~81~82 Interface type definitions: 80 => atmLogical81 => ds082 => ds0Bundle
Note:
For any discovered device that matches the sysObjectID of this filter, any interface that has an ifType value other than 80, 81, or 82 will match this filter and therefore be created. |
| Radware IP-mux16 Router |
IFTypePattern-.1.3.6.1.4.1.164.6.1.3.83 |
|
| Redback SMS 1800 Router |
IFTypePattern-.1.3.6.1.4.1.2352.1.3 |
~23~53~0 Interface type definitions: 23 => ppp 53 => propVirtual0 => invalid value (ignored)
Note:
For any discovered device that matches the sysObjectID of this filter, any interface that has an ifType value other than 23 or 53 will match this filter and therefore be created. |
| IFDescrPattern-.1.3.6.1.4.1.2352.1.3 |
~LOGICAL INTERFACE~PPP LAYER~0
Note:
For any discovered device that matches the sysObjectID of this filter, any interface that has an ifDescr description that does not contain LOGICAL INTERFACE, PPP LAYER, or 0 will match this filter and therefore be created. |
|
| Redback SMS 10000 Router |
IFTypePattern-.1.3.6.1.4.1.2352.1.4 |
~23~53~0 Interface type definitions: 23 => ppp 53 => propVirtual0 => invalid value (ignored) |
| IFDescrPattern-.1.3.6.1.4.1.2352.1.4 |
~LOGICAL INTERFACE~PPP LAYER~0 |
|
| Unisphere ERX-1440 Router |
#IFTypePattern-.1.3.6.1.4.1.4874.1.1.1.1.1 (Commented out) |
* (Described in “Optimizing the discovery of ERX devices” on page 133.) |
| #IFDescrPattern-.1.3.6.1.4.1.4874.1.1.1.1.1 (Commented out) |
~* (Described in “Optimizing the discovery of ERX devices” on page 133.) |
|
| RAD IPmux-16 Router |
IFTypePattern-.1.3.6.1.4.1.164.6.1.3.83 |
~80~81~82
Note:
For any discovered device that matches the sysObjectID of this filter, any interface that has an ifType value other than 80, 81, 82 will match this filter and therefore be created. |
| RAD IPmux-1 Router |
IFTypePattern-.1.3.6.1.4.1.164.6.1.3.82 |
~80~81~82
Note:
For any discovered device that matches the sysObjectID of this filter, any interface that has an ifType value other than 80, 81, 82 will match this filter and therefore be created. |
