Default IP_Route Connectivity Polling setting

The Default IP_Route Connectivity Polling setting determines the polling intervals that are used by the IP Availability Manager to monitor default routes. The IP Availability Manager monitors the default routes by probing the SNMP ipRouteTable (.1.3.6.1.2.1.4.21.0.0.0.0) on certain router devices.

Default values for the Default IP_Route Connectivity Polling setting lists the Default IP_Route Connectivity Polling setting parameters.

Table 1. Default values for the Default IP_Route Connectivity Polling setting

Parameter	Default value	Description
AnalysisMode	ENABLED,DISABLED Default: ENABLED	Enables or disables default-route polling and the subsequent availability analysis of the polled data.
PollingInterval	30 to 3600 seconds Default: 240 seconds	Time between successive polls for default-route data.
Retries	0 to 10 retries Default: 3	Number of retry polls to perform when the initial poll fails.
Timeout	10 to 10000 milliseconds Default: 700 milliseconds	Amount of time to wait for the poll response before the first poll request times out. The timeout value doubles for each successive retry. For Timeout=700 msec (0.7 sec) and Retries=3: 0.7 seconds for first retry 1.4 seconds for second retry 2.8 seconds for third retry