The CLI show commands for Huawei devices are listed and described in CLI commands for discovery on Huawei devices.
| Command |
Description |
Comment |
|---|---|---|
| CLI commands for general session operation |
||
| system-view |
Change to system view from current user view. |
|
| display users |
View the login information of the users on each user interface. |
|
| user-interface vty <number> |
Enter single-user interface view or multi-user interface view. Enter the view of the VTY user interface by entering the view of the user interfaces VTY 0 through VTY 3. |
|
| screen-length 0 |
Set the number of displayed lines. Setting the screen length to zero disables multiple-screen output. |
|
| CLI commands for MPLS discovery |
||
| display mpls interface |
View all MPLS-enabled interfaces. |
|
| display mpls lsp verbose |
View LSP information. By default, the display mpls lsp command displays all LSP information. By adding verbose, you display detailed information. |
|
| CLI commands for L2VPN discovery |
||
| display mpls l2vc |
Display information about Martini VCs configured on the device. If you specify an interface, the command displays information about Martini VCs configured on the CE interface. |
|
| CLI commands for L3VPN discovery |
||
| display ip vpn-instance verbose |
View the VPN instance configuration on PEs. |
|
| display bgp vpnv4 all routing-table label |
Display information about labeled routes in the BGP routing table. |
|
