The NAS Extension is installed with the IP Availability Manager. After installation, the IP Availability Manager can discover NAS devices, and perform root cause and impact analysis on these devices.

Configuring the NAS Extension involves the tasks summarized in Steps for configuring the NAS Extension.

Table 1. Steps for configuring the NAS Extension

Reference

If necessary, configure the HTTPS Adapter to support access to the managed Celerra devices.

For information about this requirement, refer to the “Configuring Control Station usernames and passwords” chapter in the IP Manager User Guide.

If necessary, configure external Control Station and Data Mover IP addresses.

For information about this requirement, refer to the “Configuring Control Station and Data Mover IP addresses” chapter in the IP Manager User Guide , which also refers you to the appropriate VMware documentation, if needed.

Install the HTTPS Adapter as a service and start the service.

“Installing and starting the HTTPS Adapter service” on page 46.

Start the IP Availability Manager.

VMware Telco Cloud Service Assurance Installation Guide for SAM, IP, and ESM Managers

Start the Global Manager.

VMware Telco Cloud Service Assurance Installation Guide for SAM, IP, and ESM Managers.

For configuration information, refer to the Service Assurance Manager Configuration Guide.

Start the Global Console.

VMware Telco Cloud Service Assurance Installation Guide for SAM, IP, and ESM Managers.