Performance Polling - Ports and Interfaces setting

The Performance Polling - Ports and Interfaces setting configures the polling intervals that are used to monitor the performance of managed ports and interfaces.

Default values for the Performance Polling - Ports and Interfaces setting lists the Performance Polling - Ports and Interfaces setting parameters.

Table 1. Default values for the Performance Polling - Ports and Interfaces setting

Parameter	Default value	Description
AnalysisMode	ENABLED,DISABLED Default: ENABLED	Enables or disables port and interface polling and the subsequent performance analysis of the polled data.
PollingInterval	30 to 3600 seconds Default: 240 seconds	Time between successive polls for interface and trunk port data.
PollingInterval_Access-Ports	30 to 3600 seconds 1200 seconds	Time between successive polls for access port data.
Retries	0 to 10 retries Default: 3	Number of retry polls to perform when the initial poll fails.
Timeout	10 to 10000 milliseconds Default: 700 milliseconds	Amount of time to wait for the poll response before the first poll request times out. The timeout value doubles for each successive retry. For Timeout=700 msec (0.7 sec) and Retries=3: 0.7 seconds for first retry 1.4 seconds for second retry 2.8 seconds for third retry