LDP Session SNMP Setting

The LDP Session SNMP Setting determines the polling intervals that are used by MPLS Manager to monitor LdpProtocolEndpoints. MPLS Manager monitors the endpoints by probing the SNMP tables on the PE or P devices.

LDP Session SNMP Setting parameters and their values lists the LDP Session SNMP Setting parameters.

Table 1. LDP Session SNMP Setting parameters and their values

Parameter	Values	Description
AnalysisMode	ENABLED,DISABLED Default: ENABLED	Enables or disables: The MPLS Manager polling of LDP protocol endpoint (LdpProtocolEndpoint) data. The subsequent analysis of the polled data to determine the status of LDP protocol endpoint connections.
PollingInterval	30 to 3600 seconds Default: 240 seconds	Sets the time between successive polls.
Retries	0 to 10 retries Default: 3	Sets the number of retry polls to perform when the initial poll fails.
Timeout	10 to 10000 milliseconds Default: 700 milliseconds	Sets the amount of time to wait for the poll response before the first poll request times out. The timeout value doubles for each successive retry. For Timeout=700 msec (0.7 sec) and Retries=3: 0.7 seconds for first retry 1.4 seconds for second retry 2.8 seconds for third retry