| Event |
Stimulus that causes firing |
| AuthorizationFailedEvent |
Unsuccessful authorization check to a protected resource |
| CommunicationRestoredEvent |
When the communication to the device has been restored |
| CredentialsCreateEvent |
When a credential gets created |
| CredentialsModifyEvent |
When a credential gets modified |
| CredentialsDeleteEvent |
When a credential gets deleted |
| DSIPOverrideEvent |
When the Device server’s IP Address is overridden |
| DSIPRestoreEvent |
When the Device server’s IP Address is restored |
| DataFileCreateEvent |
When a datafile is created |
| DataFileDeleteEvent |
When a datafile is deleted |
| DataFileModifyEvent |
When a datafile is modified |
| DeviceCompliantEvent |
When a device is compliant. Includes a list of policies run for compliancy check |
| DeviceCreateEvent |
Device create event |
| DeviceConfigurationChangeEvent |
Device configuration change |
| DeviceConfigurationUnitChangeEvent |
Device configuration unit change |
| DeviceCutThruInitiatedEvent |
When a cut-thru is initiated to a device |
| DeviceDeleteEvent |
When a design device in a workspace is deleted. This does not apply to operational devices. |
| DeiceLockBreakEvent |
When a device lock is broken by a system administrator |
| DeviceLockSuspendEvent |
When a device lock is suspended by a system administrator |
| DeviceRevisionCreateEvent |
Successful auto-discovery completion |
| DeviceLockingSystemTurnedOffEvent |
When the device locking feature is turned off |
| DeviceLockingSystemTurnedOnEvent |
When the device locking feature is turned on |
| DeviceNameChangeEvent |
When the device name is changed |
| DeviceNonCompliantEvent |
When the device goes out of compliant. A List of successful policies and a list of failed policies are included. |
| DeviceOutOfSyncEvent |
When the configuration of a device in a network is out-of-sync with the same device in a Workspace |
| DevicePWChangeEvent |
When a device password is changed |
| DeviceReturnToSyncEvent |
When the configuration of a device in a network is back in sync with the same device in a Workspace |
| DevicePolicyCheckFailedEvent |
When a policy check fails on a particular device |
| DevicePolicyCheckSuccessful |
When a policy check is successful on a particular device |
| DeviceNewConfigurationStateEvent |
When a new revision is created on a device |
| DeviceServerModifyEvent |
When a Device server is modified |
| DeviceStartConfigOutOfSyncEvent |
When a configuration on the device is out-of-sync with the run config. |
| DeviceStatusChangeEvent |
When the status of the device changes |
| DuplicateIPEvent |
When the IP address being used is already in use |
| FailedCommunicationEvent |
When communication fails to a particular device |
| GroupCreateEvent |
When a new user group gets created |
| GroupDeleteEvent |
When a group gets deleted |
| GroupImportedEvent |
When a group gets imported into the system |
| GroupModifyEvent |
When a group gets modified |
| JobApprovedEvent |
When a job gets approved |
| JobCancelledEvent |
When a job gets cancelled |
| JobCompletedEvent |
When a job completes successfully |
| JobFailedEvent |
When a job fails to execute |
| JobHeldEvent |
When a job is put on hold |
| JobPartiallyFailedEvent |
When a job fails partially |
| JobRemovedEvent |
When a job is deleted |
| JobRunEvent |
When a job goes to running state |
| JobRunManuallyEvent |
When a job is run manually |
| JobScheduledEvent |
Reaction of a push, pull, or auto-discovery job (that is not spot-approved), via UI |
| JobUpdateEvent |
Approval of a scheduled push, pull, or auto-discovery job, or creation of a spot-approved push, pull, or auto-discovery job |
| JobConflictEvent |
When there are conflicting jobs already scheduled on a particular device |
| NetworkCreateEvent |
Creation of a network |
| NetworkUpdateDevicesEvent |
Successful completion of auto-discovery job, and by managing devices, via the UI |
| NetworkModifyEvent |
Modification of a network |
| NetworkDeleteEvent |
Deletion of a network |
| PolicyCreateEvent |
When a new compliance policy is created |
| PolicyDeleteEvent |
When a compliance policy is deleted |
| PolicyModifyEvent |
When a compliance policy is modified |
| PullCompletedEvent |
When a pull has successfully completed |
| PullSpecsCompletedEvent |
When a hardware pull has successfully completed |
| PushCompletedEvent |
When a push job has completed successfully |
| RunQuickCommandEvent |
When a quick command is run on a device |
| RunSavedCommandEvent |
When a save command is run on a device |
| SavedCommandCreateEvent |
When a save command is created |
| SavedCommandModifyEvent |
When a save command is modified |
| SavedCommandDeleteEvent |
When a save command is deleted |
| SiteAccessEvent |
When a site is accessed |
| SiteCreateEvent |
When a new site is created |
| SiteDeleteEvent |
When a new site is deleted |
| SiteAddDevicesEvent |
Addition of devices to a site, via the UI |
| SiteDeleteDevicesEvent |
Removal of device from a site, via the UI |
| SiteUpdateDevicesEvent |
Devices have been added/removed from a site |
| SiteNameChangeEvent |
When the name of a site is changed |
| SiteImportedEvent |
When a list of devices are imported into a site |
| JobCompletedEvent |
When a push, pull, or auto-discovery job completes without errors |
| JobConflictEvent |
When a push job is scheduled or spot-approved, and that job contains one or more devices referenced in one or more other currently scheduled push jobs |
| JobFailedEvent |
When all the tasks of a push, pull, or auto-discovery job fail |
| JobPartiallyCompletedEvent |
When one or more-but not all- tasks of a push, pull, or auto-discovery job fail |
| TaskCompleteEvent |
When a task associated with a push, pull, or auto-discovery job completes without errors |
| TaskFailedEvent |
When a task associated with a push, pull, or auto-discovery job fails |
| TaskHeldEvent |
When a task moves to Hold status |
| TaskRemovedEvent |
When a task is removed |
| TaskRunEvent |
When a task is run |
| TemplateCreateEvent |
When a new template is created |
| TemplateModifyEvent |
When a template is modified |
| TemplateDeleteEvent |
When a template is deleted |
| TestCreateEvent |
When a config audit test is created |
| TestDeleteEvent |
When a config audit test is deleted |
| TestModifyEvent |
When a config audit test is modified |
| UserCreateEvent |
When a new user is created |
| UserDeleteEvent |
When a user is deleted from the system |
| UserImportedEvent |
When a user is imported into the system |
| UserLockedOutEvent |
When a user gets locked out because of too many unsuccessful login attempts |
| UserLoginEvent |
Successful user login |
| UserLoginExpiredEvent |
When a user’s login expires after a period of inactivity |
| UserLoginFailedEvent |
Unsuccessful user login |
| UserLogoutEvent |
When a user logs out of the system |
| UserModifyEvent |
When a user is modified |
| ViewAccessEvent |
When a view is accessed |
| ViewCreateEvent |
When a new view is created |
| ViewDeleteEvent |
When a view is deleted |
| ViewModifyEvent |
When a view is modified |
| VersionCreateEvent |
Creation of a version, via the UI |
| VersionChangeEvent |
When version changes on a device |
| VersionRemoveEvent |
When a version is removed on a device |
| voyenceEventDeviceConfigurationChangeEvent |
When a change has been made to a device's configuration |
| voyenceEventDeviceConfigurationUnitChangeEvent |
When a Configuration Unit is changed on a new Device State |
| WorkspaceAccessEvent |
When a workspace is accessed |
| WorkspaceCreateEvent |
When a new workspace is created |
| WorkspaceDeleteEvent |
When a workspace is deleted |
| WorkspaceModifyEvent |
When a workspace is modified |
